Led Illumination Check - Sony DSC-F717 Manual

DSC-F717

27. LED Illumination Check

Check a deviation of optical axis between AF illuminator and cam-
era image.
Mode
Subject
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Specified Value
Note 1: Do not look directly into AF illumination which has not
been adjusted yet or failed in the adjustment abnormally.
Note 2: Perform checking by making the shooting surface of the
Flash adjustment box perpendicular to the optical axis of
the camera.
Note 3: Perform this checking in the Flash adjustment box.
Restrict external light to enter the Flash adjustment box
as less as possible.
Note 4: Refer to "4. Preparing the Flash adjustment box".
(See page 6-7)
Note 5: Background paper (J-2501-130-A).
Adjusting method:
Order Page Address Data
1
2 F 15
3 9 62
4 9 83
5 F 15
6 9 62
7 9 83
8 6 01
9 6 02
10 F 13
Note 6: The adjustment data will be automatically input to page:
F, address: 10 to 16.
RadarW RadarW
RadarW RadarW RadarW
CAMERA
Flash adjustment box (Note 4)
Paper which reflection rate is
18% (Note 5)
(50 cm from the front of lens)
Displayed data of page: F,
address: 13
Adjusting remote commander
F
10 to 16
Data of page: F, address: 10 is
"00"
Procedure
Perform "Data setting during
camera system adjustment".
(Refer to page 6-14)
Note down the data.
Note down the data.
Note down the data.
80 Press PAUSE button.
06 Press PAUSE button.
50 Press PAUSE button.
AF Press PAUSE button. (Note 6)
Check the data changes to
"01".
Check the data.
00: Normal
FF: Defective
Processing after Completing Adjustment:
Order Page Address Data
1 6 01
2 F 15
3 9 62
4 9 83
5
6-36
Procedure
00 Press PAUSE button.
Set data noted down at step 2,
and press PAUSE button.
Set data noted down at step 3,
and press PAUSE button.
Set data noted down at step 4,
and press PAUSE button.
Release the data setting per-
formed at step 1. (Refer to
page 6-14)