Table of Contents
Advertisement
Getting started
Deskset installation
5.
Plug the power adapter into an electrical outlet not controlled by a
wall switch.
Plug the large
end of the
deskset power
adapter into an
electrical outlet
not controlled by
a wall switch.
MS2015 Engraving:
Plug one end of the
MS2085 Engraving:
Ethernet cable into the
Ethernet jack (
) at the
back of the deskset.
IMPORTANT INFORMATION
1.
Use only the power adapter supplied with this product. To order a replacement power adapter, visit
www.telephones.att.com
our website at
1 (866) 288-4268
In Canada, dial
2.
The power adapter is intended to be correctly oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or
cabinet outlet.
Use only
Supplied
Adapter
Use only
Supplied
L4
L3/4
L2
L1/2
Adapter
5.1
.
Router
Router
1 (800) 222-3111
,
or call
6
Plug the other end of
the Ethernet cable into
the router connecting to
your console.
Route the Ethernet
cable and power cord
through these slots.
Plug the small end
of the deskset power
adapter into the power
jack at the back of the
deskset.
.
Advertisement
Table of Contents
