Using The Bluetooth Audio Player - JVC KD-NX5000 Instructions Manual

When a call comes in...
Bluetooth Phone
P902i
Receiving Call
Jack
09845671234
10:35
The screen is automatically changed to
Bluetooth Phone.
When Auto Answer is activated
The unit answers the incoming calls
automatically. (☞ [89])
• When Auto Answer is deactivated, press
MENU, DISP, BACK, ENT,
or TRAFFIC to answer the incoming
call.

Using the Bluetooth audio player

Select "Bluetooth
Audio."
Start playback.
• ☞ [83] for connecting a new device.
• ☞ [85] for connecting/disconnecting a
registered device.
• ☞ [85] for deleting a registered device.
Name and
phone number
(if acquired)
5 , ∞ , ,
*1
Connected device
Bluetooth icon: lights up when the adapter is
*1
*2 Each time you press 5 ∞, the registered device names (and
New Device when a new device can be registered) appear in
turn.
*3 Indicates the button pressed. It may be different from the
operation status.
When an SMS comes in...
If the mobile phone is compatible with SMS
(Short Message Service) and Message
Info is set to Auto (☞ [89]), the unit rings
and Receiving Message appears on the
monitor to inform you of the arrival of the
message.
To read the message
While Receiving Message is displayed...
• You cannot edit or send a message through
the unit.
Equalizer type ☞ [98]
*2
Play *3
Stop playback.
connected.
Audio player
Mobile phone with audio function
You can use the following buttons on the
remote controller for the Bluetooth audio
operations.
ENT 6, BACK: Start/stop playback.
4/¢: Reverse/forward skip
VOL +/−: Adjust the volume.
Number keys: Enter the PIN code.
Using Bluetooth devices
Reverse/forward skip
87