JVC KD-NX5000 Instructions Manual page 106

About sounds reproduced through the rear terminals
• Through the analog terminals (Speaker out/LINE OUT):
2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are
downmixed. (☞ [92] Down Mix.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this terminal.
To reproduce multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect an
amplifier or a decoder compatible with these multi-channel sources to this terminal, and set D.
Audio Output correctly. (☞ below.)
Output signals through the DIGITAL OUT terminal
Output signals are different depending on the D. Audio Output setting (☞ [92]).
D. Audio Output
Playback disc
48 kHz, 16/20/24 bits
Linear PCM
96 kHz, Linear PCM
DVD
with Dolby Digital
Video
with DTS
with MPEG Audio
44.1/88.2/176.4 kHz,
16/20/24 bits Linear
PCM
48/96/192 kHz,
DVD
16/20/24 bits Linear
Audio
PCM
with Dolby Digital
with DTS
Audio CD, Video CD
Audio CD with DTS
with Dolby Digital
DivX
with MPEG Audio
MPEG
MP3/WMA
WAV
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the
DIGITAL OUT terminal if the discs are not copy-protected.
106 106
PCM Only
48 kHz, 16 bits stereo Linear PCM*
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits stereo
Linear PCM
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits stereo Linear PCM
44.1 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits stereo
Linear PCM
48 kHz, 16 bits stereo Linear PCM
44.1 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits stereo
Linear PCM
32/44.1/48 kHz, 16 bits Linear PCM
44.1/48 kHz, 16 bits Linear PCM
32/44.1/48 kHz, 16 bits Linear PCM
44.1 kHz, 16 bits stereo Linear PCM
Dolby Digital/
PCM
Dolby Digital bitstream
Dolby Digital bitstream
Dolby Digital bitstream
Stream/PCM
DTS bitstream
MPEG bitstream
DTS bitstream
DTS bitstream