Starting Guidance; Setting A Destination Using Shortcut Menu - JVC KD-NX5000 Instructions Manual

Starting guidance

• You can set destinations only after calibration is finished. (☞ [9])

Setting a destination using Shortcut Menu

Scroll the map to display the destination at the centre of the
map.
Call up Shortcut Menu.
Select [Go Here]
The System starts calculating the route to the selected destination, and guidance starts.
To cancel guidance
1
Call up Shortcut Menu.
2
Select [Cancel Guidance]
26
to start guidance.
You can also cancel guidance through
Destination Menu ] Cancel Guide.
.