Handset Reset; Base Reset; Auto Provision - Yealink W52P User Manual

Return to Contents
4. Phone settings.

4.22 Handset reset.

To reset the handset:

4.23 Base reset.

To reset the base station:
Please note:
Base station reset may take a few minutes. Do not power off until the base station starts up successfully.

4.24 Auto provision.

You can reset individual settings that you have made on the handset. Resetting handset
will not overwrite settings of directory, call history, voice mail and the handset
registration to the base station. Other customised settings on the handset will be reset
to factory settings after handset reset. We recommend that you ask your system
administrator for advice before resetting your handset.
1. Press to enter the main menu.
2. Select ->System settings->Handset reset.
The LCD screen prompts "Reset handset to default?".
3. Press the Yes soft key to reset the handset or the
You can reset the base station to factory settings. This will clear all individual settings of
the base station (e.g., directory and account registrations). Handset registrations and
the system PIN will not be reset to factory defaults. We recommend that you ask your
system administrator for advice before resetting your base station.
1. Press to enter the main menu.
2. Select ->System Settings->Base Reset.
3. Enter the system PIN (default: 0000).
Done
4. Press the soft key.
All individual settings of the base station are reset to factory defaults successfully. The
power indicator LED on the base station slow flashes when resetting the base station.
You can trigger the auto provisioning process using the wizard. After you enter the user
name and password in the wizard and confirm to perform an update, the base station
tries to connect the RPS (Redirection and Provisioning Service) server. If the base
station successfully connects the RPS server, the RPS server responds the base station
with the URL for downloading the configuration files. Then the base station tries to
perform the auto provisioning process. Contact your system administrator for the user
name and password used to connect the RPS server.
No soft key to cancel.
42