Playing A Bluetooth Device - Sony RSX-GS9 Operating Instructions Manual

1
Connect a USB device to the USB type-A
port (page 11).
Playback starts. (Depending on the file
organization, playback may take time to start.)
2
Adjust the volume on this unit.
To pause playback
Press .
To remove the device
Stop playback, then remove the device.
To display the sampling frequency and bit
depth of the audio file being played
Press DSPL during playback.
Notes
 When DSD playback is performed via USB1 or USB2,
the sampling frequency and bit depth before
converting to PCM format are displayed.
 When an iPod/iPhone is connected to USB1 or USB2,
the sampling frequency and bit depth are not
displayed.
Caution for iPhone
When you connect an iPhone via USB, phone call
volume is controlled by the iPhone, not the unit. Do
not inadvertently increase the volume on the unit
during a call, as a sudden loud sound may result
when the call ends.
Playing a High-Resolution USB
Audio Supported Device
For details on the compatibility of your High-
Resolution USB Audio device and the DSD
supported audio playback software or app, see the
support site on the back cover.
For your safety
 Do not operate the High-Resolution USB Audio
supported device while driving.
 Before driving your car, make sure the High-
Resolution USB Audio supported device will not
play loudly during playback (especially during
native DSD playback).
1
Connect a High-Resolution USB Audio
supported device to the USB micro-B
port (page 11).
2
Operate the device to start playback.
3
Adjust the volume on this unit.
To stop playback
Operate the device to stop playback.
The controls on the unit or the remote commander
do not work.
To remove the device
Stop playback, then remove the device.
To display the sampling frequency and bit
depth of the audio file being played
Press DSPL during playback.
For example, the information appears as follows:
[192/24]: 192 kHz/24 bit
[DSD 5.6MHz]: 5.6 MHz/1 bit
Notes
 Gapless playback is performed when the sampling
frequency and bit depth are identical to those of the
next or previous track.
 If the displayed sampling frequency and bit depth are
not appropriate, check the settings of the device and
its connection.
 For a DSD file on the device connected via the USB
micro-B port, native DSD playback is performed.
During playback, make sure that the native DSD
playback on the High-Resolution USB Audio
supported device performs properly.
Corresponding data interface, sampling frequency
and bit depth:
 PCM:
Max. 192 kHz/24 bit
 DSD:
ASIO Native: 2.8 MHz/1 bit, 5.6 MHz/1 bit
DoP: 2.8 MHz/1 bit, 5.6 MHz/1 bit

Playing a BLUETOOTH Device

You can play contents on a connected device that
supports BLUETOOTH A2DP (Advanced Audio
Distribution Profile). Using an LDAC-supported
device is recommended.
1
Make BLUETOOTH connection with the
audio device (page 9).
2
Press SRC to select [BT Audio].
Alternatively, press SOURCE on the remote
commander.
3
Operate the audio device to start
playback.
4
Adjust the volume on this unit.
Notes
 Even if the source is changed on this unit, playback of
the audio device does not stop.
 [BT Audio] does not appear in the display while
running the "SongPal" application via the BLUETOOTH
function.
13
GB