Searching And Playing Tracks; Handsfree Calling (Via Bluetooth Only); Receiving A Call; Making A Call - Sony RSX-GS9 Operating Instructions Manual

Hide thumbs Also See for RSX-GS9:
Table of Contents

Advertisement

To match the volume level of the BLUETOOTH
device to other sources
Start playback of the BLUETOOTH audio device at a
moderate volume, and set your usual listening
volume on the unit.
Press and hold MENU, then select [BT Setting] 
[BTA Level] (page 18).
To apply the SBC codec only
Press and hold MENU on the remote commander,
then set [Audio Codec] in [BT Setting] to [SBC]
(page 18).

Searching and Playing Tracks

Use the remote commander to perform the
following.
For the iPod, repeat play and shuffle play are not
available.
Repeat play and shuffle play
1
During USB1 or USB2 playback, press REP
or SHUF repeatedly to select the desired
play mode.
Playback in the selected play mode may take
time to start.
Repeat play mode:
 [Repeat Track] plays the track repeatedly.
 [Repeat Album] plays tracks in the album
(folder) repeatedly.
 [Repeat OFF] cancels repeat play.
Shuffle play mode:
 [Shuffle Device] plays all tracks in the "Music"
folder in random order.
 [Shuffle OFF] cancels shuffle play.
Notes
 During repeat play, shuffle play mode cannot be
selected. During shuffle play, only [Repeat Track]
can be selected, and [Repeat Album] cannot be
selected.
 [Shuffle Device] is only available when repeat play
is off.
 When shuffle play is performed or canceled,
playback starts from the first track in the "Music"
folder.
 While shuffle play is performed with [Repeat
Track] selected, pressing  will cancel [Repeat
Track] and restart shuffle play from the first track
in the "Music" folder.
 During shuffle play, the list display on "SongPal" is
not available. To enable the list display, cancel
shuffle play mode.
14
GB
Handsfree Calling (via BLUETOOTH
only)
To use a cellular phone, connect it with this unit. For
details, see "Preparing a BLUETOOTH Device"
(page 9). Only while the "SongPal" connection is
established, [BT Phone] becomes available when
selecting the source.
Use the controls on the unit to perform the
following.

Receiving a Call

1
Press any button when a call is received
with a ringtone.
The phone call starts.
Note
The ringtone and talker's voice are output only from the
audio device connected to FRONT AUDIO OUT.
To reject the call
Press and hold the following button:
 any button other than SRC for 2 seconds.
 SRC for 1 to 2 seconds.
To end the call
Press SRC.

Making a Call

You can make a call via "SongPal" only. For details,
see "SongPal with iPhone/Android smartphone"
(page 15).
Available Operations during
Call
To adjust the ringtone volume
Rotate the volume dial while receiving a call.
To adjust the talker's voice volume
Rotate the volume dial during a call.
To adjust the volume for the other party (Mic
gain adjustment)
Press  during a call.
Adjustable volume levels: [MIC High], [MIC Low],
[MIC Middle].

Advertisement

Table of Contents
loading

Table of Contents