Advertisement
ISO MOUNT RADIO PROVISION WITH POCKET
*
Note: Refer also to the instructions included with the aftermarket radio.
1
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit. (Figure A)
3
Snap the pocket into the bottom
opening of the radio housing.
(Figure B)
4
Slide the head unit into the radio
opening until the side clips engage.
(Figure C)
5
Snap the Trim plate into the Radio
Housing. (Figure C)
6
Reassemble dash in reverse order of
disassembly.
99-7878B KIT ASSEMBL Y
5
A
B
C
Advertisement
