ZyXEL Communications eir F1000 User Manual page 21

Table 1 LED Descriptions (continued)
LED
INTERNET
WAN
LAN
WiFi 2.4G
Phone1,
Phone2
USB1
USB2
eir F1000 Modem User's Guide
COLOR STATUS DESCRIPTION
Green On The Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the
DSL connection is up.
Blinking The Device is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged mode.
Red On The Device attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
Green On The Device has a successful 1000 Mbps Ethernet connection on the
WAN.
Blinking The Device is sending or receiving data to/from the WAN at 1000 Mbps.
Orange On The Device has a successful 10/100 Mbps Ethernet connection on the
WAN.
Blinking The Device is sending or receiving data to/from the WAN at 10/100
Mbps.
Off There is no Ethernet connection on the WAN.
Green On The Device has a successful 1000 Mbps Ethernet connection with a
device on the Local Area Network (LAN).
Blinking The Device is sending or receiving data to/from the LAN at 1000 Mbps.
Off The Device does not have an Ethernet connection with the LAN.
Green On The 2.4 GHz wireless network is activated.
Blinking The Device is communicating with other wireless clients.
Orange Blinking The Device is setting up a WPS connection.
Off The 2.4 GHz wireless network is not activated.
Green On A SIP account is registered for the phone port.
Blinking A telephone connected to the phone port has its receiver off of the hook
or there is an incoming call.
Orange On A SIP account is registered for the phone port and there is a voice
message in the corresponding SIP account.
Blinking A telephone connected to the phone port has its receiver off of the hook
and there is a voice message in the corresponding SIP account.
Off The phone port does not have a SIP account registered.
Green On The Device recognizes a USB connection through the USB1 slot.
Blinking The Device is sending/receiving data to /from the USB device connected
to it.
Off The Device does not detect a USB connection through the USB1 slot.
Green On The Device recognizes a USB connection through the USB2 slot.
Blinking The Device is sending/receiving data to /from the USB device connected
to it.
Off The Device does not detect a USB connection through the USB2 slot.
Chapter 1 Introducing the Device
21