Kenmore 417.4191 series Use & Care Manual page 16

Operating Instructions
Operating Your Washer, continued
6
Select the appropriate cycle and settings for the load.
* Press the POWER button to turn on the unit.
o Select a desired cycle by pressing its icon.
* The estimated cycle time, rinse water temperatures,
flnaJ spin speed, and soil level for each cycle wiJ{ be
indicated for the cycle selected. See the "Washer
Settings Chart" for more details.
* To change the settings, press the Wash Temp, Spin
Speed and Soil Level icons to scroll to the desired
settings.
* To select or delete an option, press the icon for that
option. The indicator will be ilbrninated when the op-
tion has been se{ected. The indicator will no longer be
lighted when the option has been deleted.
_, NOTE
To provide the best care for your laundry, not every
setting or option is available with every cycle. If a setting
or option is not available for the cycle se{ected, the
indicator will not light,
7 Start the washer.
* Close the door and press START. The washer will not
operate with the door open. "Check the door" will be
displayed as a reminder to close the door.
° Select Delay Start to delay the beginning of the cycle,
if desired.
" As a safety measure, the door will automatically lock
during the entire wash cycle and the door lock indica-
tor will be lighted.
" To add a forgotten item to the wash drum, press PAUSE
and open the door. "Pause" will be displayed along
with the estimated remaining cycle time. Add the item,
close the door and press START to resume the cycle.
* If changes to the settings or options are attempted
after the cycle starts, you will hear several beeps
when the buttons are pressed. To change the settings
or options, press PAUSE, make the new selections and
press START again.
To change the cycle once the cycle has begun, press
the POWER button to cancel the current cycle, press
the POWER button to turn on unit again, select a new
cycle, and press START again. Just pressing another
cycle icon will not change the cycle.
* To stop the cycle, press the POWER button.
* A signal will sound at the end of the cycle if the
chime option has been selected.
* Remove items from the washer when the cycle ends
and place in dryer, line dry or dry fiat as directed on
the fabric care label.
For best results
Follow the fabric care label
instructions on items to be dried.
Excess wrlnldlng, color transfer or odors may develop
in items left in the washer after the cycle has ended, if
not removed promptly.
Do not I .... the d .... pen if th ......... i! child ......
pets present. An open door could entice children to hang
on the door or crawl inside the washer. If there are no
small children p ...... t, y .... y I .... the d .... jar to
p ..... t odor build up, ]