Miele KWT 6321 UG Operating And Installation Instructions page 35

Other problems
Problem
The alarm is
sounding and the
temperature
display is flashing.
You cannot switch
the appliance off.
The slats on the
wooden shelves
are warping.
Mould has begun
to form on the wine
bottle labels.
Possible cause
The temperature in the zone
has risen higher or fallen lower
than the temperature set. This
could be because
– the appliance door has been
opened frequently.
– the ventilation gaps are
covered over.
– the power was cut for a long
time.
The safety lock is activated.
The 0 symbol is lit up in the
display.
Volume change due to
moisture absorption or drying
out is a typical characteristic
of wood. An increase in
humidity will cause wooden
components to warp, which
can lead to cracking.
Knots and grain patina are part
of the natural character of the
wood.
Mould can begin to form on
the labels, depending on the
type of label adhesive used.
Problem solving guide
Remedy
^ Rectify the cause of the
alarm. The temperature
display will stop flashing
and the alarm will stop.
^ Switch off the safety
lock.
^ Clean the wine bottles
and remove any
adhesive residue.
35