Motorola MBP27T User Manual page 10

Baby monitor with touchless thermometer
Hide thumbs Also See for MBP27T:
Table of Contents

Advertisement

4. If there is no connection or you are out of range, the video display will go
off and the symbol
every 9 seconds. (If the unit is on scan
Move the parent unit closer to the baby until the link is re-established.
5. Press and hold the
scrolls fully across, to turn OFF the parent unit.
NOTE
The battery icon
and it gives a beep every 5 seconds. The battery needs to be recharged. Battery
pack takes about 16 hours to charge fully.
When charging
1. If the parent unit is turned OFF, when the adapter is plugged in, it displays a
"mains plug" icon briefly, then a large battery icon with internal segments
cycling for 60 seconds, before the display goes blank, but the unit
continues to charge. The Blue LED at top left corner lights up to indicate
the adapter is plugged in.
2. If the parent unit is turned ON, when the adapter is plugged in, the battery
icon in the screen's top right corner will show that the battery is charging by
cycling the internal segments. The segments stop cycling when the battery
is fully charged. The Blue LED at top left corner lights up to indicate the
adapter is plugged in.
10
will flash on the LCD display, and the unit will beep
P
POWER ON/OFF button, until the progress bar
turns RED and flashes to indicate that the battery is low,
1 ?
the
symbol displays.)
Getting Started

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mbp27t/2Mbp27t/4Mbp27t/3

Table of Contents