Forehead Temperature Mode; Object Temperature Mode - Motorola MBP27T User Manual

3.5.1

Forehead temperature mode

• Always make sure the probe lens is clean without any damage
and the forehead is clean.
• Point the probe tip at about 1 cm away from the central
forehead of the baby (Fig. 1)
• Press and hold the Forehead Temperature button until you hear the beep and
the reading displays on the LCD screen.
Note:
a. Temperature Measurement Range: Forehead temperature
mode: 32~42.2°C (89.6~108°F)
b. Forehead temperature is displayed in oral mode. This mode converts the
forehead temperature to display its "oral-equivalent" value.
c. Before the measurement, please stay in a stable environment for
5 minutes and avoid exercise, bath for 30mins. "Normal" body
temperature varies from person to person and changes according to time
of day and body location. Hot or cold baths, physical exercise, smoking
and drinking hot or cold drinks may change body temperature by one
degree or more.
d. Remember to keep the forehead area clean and away from sweat,
cosmetics and scar while taking temperature.
e. Holding the device too long may cause a higher ambient temperature
ready of the probe. This could make the body temperature measurement
lower than actual.
3.5.2

Object Temperature Mode

Point the probe tip at about 1 cm away from the liquid surface. Press and hold
the liquid temperature button to the liquid surface temperature like milk or bath
tub temperature. The reading will be displayed at the LCD screen.
Note:
a. Temperature Measurement Range: Object temperature mode:
-20~80°C (-7.6~176°F)
b. Application include temperature measurements for water, milk, cloth, skin
or other objects.
c. This mode shows the actual and unadjusted surface temperature which is
different from the body temperature.
Using the Baby Monitor
Figure 1
13