Note : Follow the disassembly procedure in the numerical order
given.
2-1. TERMINAL COVER, LOWER CASE
Insert the small type flat-blade
screwdriver into the groove, and
lift up rubber foot.
2 Feet (2 pcs)
3 Screws (2 pcs)
2-2. UPPER CASE
1 Claw
2 Claw
SECTION 2
DISASSEMBLY
5 Remove case (lower) in
the arrow direction.
4 Screws
(3 pcs)
1 Remove terminal
cover in the arrow
direction.
5 Remove case (upper) in
the arrow direction.
4 Claw
3 Claw
2-3. MECHANISM DECK
6 Mechanism deck
4 Screws
(B3) (2 pcs)
2-4. CHUCKING ARM BLOCK
2-1
DVP-F21
5 Screw (B3)
1 Ground
plate (rear)
2 Ground plate
(side)
3 Flexible boards
(3 pcs)
(CN201, 202, 402)
2 While opening claw in the arrow
direction, and remove chucking
arm assembly.
1 Tension spring