Troubleshooting - Gtech HT05 Plus Operating Manual

Troubleshooting

Trimmer fails to operate
Cutting blade will not cut
Blade will not move
Cutting time has reduced
Trimmer stops when cutting
No light showing on charger
If this doesn't solve your problem don't worry, we will help.
Go to www.gtech.co.uk or call 01905 345 891
14
1. Recharge battery.
2. Check switch. It will click if
operating correctly.
1. Blade is either worn or damaged.
Replace blade.
1. Clean and lubricate blade.
2. Replace blade.
1. Use lighter cutting action and cut
in several stages.
2. Fully discharge and recharge
battery.
3. Clean and lubricate blade.
4. Replace blade.
1. What for automatic cut out to
reset. Use lighter cutting action.
2. Check blade and remove
any debris.
3. Charge battery.
1. Check connections.
2. Check socket.