Product Care - Gtech HT05 Plus Operating Manual

Product Care

To ensure that your HT05 Plus gives you long and reliable service, carry out the following
maintenance regularly:
• Check for obvious defects such as loose, dislodged, worn or damaged blades, loose
fixings, and worn, damaged, or loose parts.
• Check that covers and guards are correctly fitted and undamaged.
• Always clean the cutting blade after use and apply a lubricating oil or spray
before storage.
• During longer cutting periods it is recommended to lubricate the blade. This will improve
cutting performance and maximise the run time.
• Before use check the condition of the cutting edges of the blade and that the blade
fixings are secure.
• Do not use water, solvents, or polishes to clean the trimmer. Wipe clean with a dry cloth.
• Do not use abrasive materials to clean the product, and do not immerse it in water.
• Store in a secure, dry place. Do not expose to moisture.
PLEASE NOTE: If the product needs to be repaired or replaced only use replacement
parts which are approved by the manufacturer.
Spare parts can be purchased from Grey Technology Ltd:
tel : 01905 345 891 www.gtech.co.uk
13