Troubleshooting; Product Support - Gtech HT Series Operating Manual

Troubleshooting

Trimmer fails to operate
Cutting blade will not cut
Blade will not move
Cutting time has reduced
Trimmer stops when cutting
– 1 flashing green LED
Trimmer stops when cutting
– 4 solid red LEDs

Product support

If these initial tips do not solve your problem we please visit our support area where you can find
troubleshooting help including online manuals, FAQs and how-to-videos, as well as genuine
spares and replacement parts compatible with your product.
Visit: www.gtech.co.uk/support
Online
5514_HT50_Manual_aw3.indd 15 5514_HT50_Manual_aw3.indd 15
1. Recharge battery.
2. Check switch. It will click if operating
3. Blade is jammed.
1. Blade is either worn or damaged.
2. Replace blade.
1. Clean and lubricate blade.
2. Replace blade.
1. Use a lighter cutting action and cut in
2. Fully discharge and recharge battery.
3. Clean and lubricate blade.
4. Replace blade.
1. Battery is fully discharged.
2. Recharge the battery
1. The trimmer has jammed/overloaded.
2. Wait for automatic cut out to reset.
3. Check blade and remove any debris.
4. Use a lighter cutting action
Live chat support support@gtech.co.uk
correctly.
several stages.
How to Videos
15
10/07/2024 16:29 10/07/2024 16:29