Table of Contents
Advertisement
Installation and important information
Locate the TV away from direct sunlight and strong
lights, soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to
prevent direct sunlight falling on the screen.
Place the TV set on a stable, level surface that
can support the weight of the TV. As an additional
safety measure you secure the TV to the level
surface or a wall, as shown in the illustration, using
sturdy strap.
Otherwise secure the TV on the level surface
(Fall prevention hole in stand) using the mounting
screw.
The LCD display panels are manufactured using
an extremely high level of precision technology,
however sometimes some parts of the screen may
be missing picture elements or have luminous
spots. This is not a sign of a malfunction.
Make sure the TV is located in a position where it cannot be pushed or hit by objects, as pressure
will break or damage the screen. Also, please be certain that small items cannot be inserted into
slots or openings in the case.
Cleaning the screen and cabinet...
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you
do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Please use a wall bracket appropriate for the size and weight of the LCD TV.
• Two people are required for installation.
• Never use the four screws attached to the TV.
• To install a wall-mount from another manufacturer, use the SPACERS (supplied).
1.
Unplug and remove any cables and/or other
component connectors from the rear of the TV.
2.
Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket.
3.
Follow the instructions provided with your wall
bracket. Before proceeding, make sure the ap-
propriate bracket(s) are attached to the wall and
the back of the TV as described in the instruc-
tions provided with the wall bracket.
4.
Make sure to place the spacers supplied be-
tween the bracket and the back of the TV.
5.
Always use the screws supplied or recom-
mended by the wall mount manufacturer.
Removing the Pedestal Stand:
1.
Carefully lay the front of the unit face down on
a flat, cushioned surface such as a quilt or a
blanket. Leave the stand protruding over the
edge of the surface.
NOTE: Extreme care should always be used when
removing the pedestal stand to avoid dam-
age to the LCD panel.
Where to install
When using a Wall Bracket
2.
3.
6
Sturdy tie (as short as possible)
Fixing strap
Fall prevention hole in stand
Fixing strap
Stand style is dependent on model
Remove four screws.
(Do not reuse these screws for
attaching a wall bracket.)
Place four spacers (supplied).
*Screw Type for Wall Bracket:
• 32DB833G: M6/10mm/20KG
• 42DB833G: M8/12mm/20KG
Remove the screws.
Once you have removed all six screws
holding the pedestal stand in place, remove
the pedestal stand from the TV by sliding
the pedestal stand away from the TV.
Stand clip
Screw
Wall bracket
Spacer
(supplied)
TV back panel
Advertisement
Table of Contents
