Installation And Important Information; Where To Install; When Using A Wall Bracket - Toshiba L243 D Owner's Manual

Installation and Important Information

Locate the television away from direct sunlight and strong lights, soft, indirect lighting is
recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the
screen.
Place the TV set on a stable, level surface that can support the weight of the TV.
The LCD display panels are manufactured using an extremely high level of precision technology,
however sometimes some parts of the screen may be missing picture elements or have luminous
spots. This is not a sign of a malfunction.
Make sure the television is located in a position it cannot be pushed or hit by objects, as pressure will
break or damage the screen. Also, please be certain that small items cannot be inserted into slots or
openings in the case.
Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the
TV pedestal. Studies indicate that plastics may weaken and crack over time from the
combination effects of chemical agents and mechanical stress (such as weight of TV).
Failure to follow these instructions could result in serious injury and/or permanent
damaged to TV and TV pedestal.
Cleaning the screen and cabinet...
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you
do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Please use a wall bracket appropriate for the size and weight of the LCD TV.
Two people are required for installation.
To install a wall-mount from another manufacturer.
1. Unplug and remove any cables and/or other connections from the rear of the TV.
2.
3. Follow the instructions provided with your wall bracket. Before proceeding, make sure the appro-
priate bracket(s) are attached to the wall and the back of the TV as described in the instructions
provided with the wall bracket.
4. Always use the screws supplied or recommended by the wall mount manufacturer.
Removing the Pedestal Stand:
1.
ioned surface with the stand hanging over the edge.
2. Remove the screws.
3. After the screws are removed, hold the pedestal stand in
place, then remove it from the TV by sliding away from the
bottom of the TV.
NOTE: Extreme care should always be used when removing
the pedestal stand to avoid damage to the LCD panel.

Where to install

When using a Wall Bracket

5
- 32W24** | 32L/40L24** x 4