Table of Contents
Advertisement
Cleaning and Maintenance
Stainless Steel Cooktop Models
Oven Maintenance
Removing the Door
WARNING:
When removing the door:
• Make sure oven is cool and power to the oven has been turned off before removing the door. Fail-
ure to do so could result in electrical shock or burns.
• The oven door is heavy and fragile. Use both hands to remove the oven door. The door front is
glass. Handle carefully to avoid breaking.
• Grasp only the sides of the oven door. Do not grasp the handle as it may swing in your hand and
cause damage or injury.
• Failure to grasp the oven door firmly and properly could result in personal injury or product damage.
• To avoid injury from hinge bracket snapping closed, be sure that both levers are securely in place
before removing door. Also, do not force door open or closed - the hinge could be damaged and
injury could result.
Replacing the Oven Door
English 46
No maintenance is required other than daily cleaning as described in "Cleaning
Guidelines" on page 39.
1. Be sure to read the above WARNING before attempting to remove oven
door.
2. Open the door completely.
3. Flip lever on hinge toward you.
4. Close the door to approximately halfway open.
5. Holding the door firmly on both sides using
both hands, pull the door straight out of the
hinge slots. Hold firmly, the door is heavy.
6. Place the door in a convenient and stable
location for cleaning.
1. Holding the door firmly in both hands, place hinges in hinge slots.
2. Open door all the way to expose hinges and slots. Push lever (one on each
hinge) away from you (back toward range).
3. After moving the hinge brackets back down into position, be sure to close
and open the door slowly to assure that it is correctly and securely in place.
4. Door should be straight, not crooked.
Figure 22: Hinge Positions
Advertisement
Table of Contents
