32 Key Alpha-Mode Keymap - Honeywell MX8 Reference Manual

32 key Alpha-Mode Keymap

The following keypad
l
emulators use a separate keymap.
When using a sequence of keys that require an alpha key, first press the Alph key. Use the Shft sticky key for upper
l
case alphabetic characters.
Tapping the Power key when in any sticky mode (Blue, Orange, Shift, etc) either turns the device On (when Off) or
l
places it in Suspend (when active).
Pressing the Alph key locks the keypad into alpha mode. Pressing Alph a second time toggles alpha mode off.
l
To create a combination of numbers and letters before pressing Enter, remember to tap the Alph key to toggle between
l
Alpha and Numeric mode.
Since letters are mapped to Alt, Ctl, Shft, these modifiers must be pressed before Alph. For example, for Alt T, press
l
Alt, then Alph, then Alt again.
When using a sequence of keys that do not include the Alph key but does include a sticky key, press the sticky key first
l
then the rest of the key sequence.
For those keymaps that require remapping (MAP), keys can be remapped using the Buttons Panel (Start > Settings >
l
Personal > Buttons).
To get this Key / Function
Power / Suspend
Field Exit
(default is VK_PAUSE)
MAP = Mappable
=
(
!
)
Volume Adjust Mode
Display Backlight Brightness
Adjust Mode
Toggle Alpha Mode
Toggle Blue Mode
Toggle Orange Mode
Toggle Shift Mode
Alt Mode
Control Mode
keymap is used on an MX8 that is NOT running a Terminal Emulator. Honeywell terminal
Power
Blue (MAP)
Orange
Blue
Orange
Blue
Orange
Blue
Alph
Blue
Orange
Shft
Alt
Ctrl
Press these Keys in this Order
Shft (MAP) Diamond #1
Diamond#2
Shft (MAP)
Default is Mappable
Diamond#2
Shft (MAP)
Default is Mappable
Diamond#3
Shft (MAP)
Default is Mappable
Diamond#3
Shft (MAP)
Default is Mappable
Up Arrow
Scan
Down Arrow
Up Arrow
Scan
Down Arrow
8-7