Control Elements - Miele PT 8257 WP Operating Instructions Manual

Control elements

a Display
1 Cottons dry plus
2 Cottons dry
3 Cottons damp
After switching on, the "Welcome" display will appear
for a short time followed by the programme list. The
most recently used programme is highlighted.
b Function buttons
The six buttons underneath the display are the
function buttons. These buttons have specific
functions depending on the status of the machine.
These functions will be listed in the display above the
buttons and will be highlighted once selected.
If the machine is reprogrammed to "Direct button
allocation" the first 6 programmes listed in the display
can be selected directly via these buttons.
c Start button
The lightring will flash when a selected programme
can be started. Pressing the Start button will start the
programme. After a programme has started, pressing
this button will show the display as it was before the
start of the programme.
0%
0%
20%
FC A
Guide to the machine
d PC / Optical interface
This interface is used for transferring data to the
control unit from a PC and vice versa.
e Rotary selector
Turning the selector brings up options and menus in
the display.
Pressing the selector confirms your selection.
f Chip card reader (optional)
If the machine has been programmed for card
operation, you can only use those programmes
stored on the card to dry laundry.
Insert the card in the direction of the arrow (on the
card).
g I Mains on switch
Switches the machine on.
h 0 Mains off switch
Switches the machine off.
9