Optional Modules; Operating Data - Miele PT 8257 WP Operating Instructions Manual

Operating data

By pressing the \ "Operating data" button, the
module can be used to read or delete operating data
either before the start of a programme, or after it has
finished.
1 Cottons dry plus
2 Cottons dry
3 Cottons damp
\
After pressing the \ button the following will appear
in the display:
Operating data module
Total data
Programme data
\
Selection choice:
– Total data
In this option all programme data is collated and
summarised.
– Programme data
Programme data contains all the data called up
during a programme.
– Delete data
- Module (delete total data including programme
data)
- Total data (only delete total data)
- Programme data (only delete programme data)
Pressing the button again deselects the \
"Operating data" option.
If there is no more memory available in the operating
data module a message will appear after pressing
the "Start" button to say that the operating data will be
overwritten.
If you press the A "Back" button or do not press the
"Start" button within 30 seconds, the display will revert
to the way it was before starting the programme.
Total data
Operating data module
Total data
Programme data
\
After selecting Total data, the following (example) will
appear in the display:
0%
0%
20%
FC A
e
A
e
A
Operating data module ~ Total data
Total time power on: 200,987 h
Operating hours: 123456 h
\
Other options:
Total time power on: 200,987 h
Operating hours: 123,456 h
Duration heating active: 123,456 h
Duration drive motor active: 93,456 h
Programme starts: 23,456
Programme stops: 567
Programme cancellations: 67
Amount of laundry: 1,234,567 kg
Energy: 12,345,678 kWh
Programme data
Operating data module
Programme data
Delete data
\
After selecting Programme data the following
(example) will appear in the display:
Operating data module~ Programme data
1 Cottons dry plus
2 Cottons dry
\
Select the programme you want from the list and
press the rotary dial to call up a list of all programme
starts including date and start time for that
programme (Cottons dry plus in the example).
Programme data ~ 1 Cottons dry plus
Date: 21.05.2009 Start time: 11:30
Date: 21.05.2009 Start time: 12:30
\
Select the required programme start from the list for
programme 1 Cottons dry plus and confirm your
choice by pressing the rotary dial.
Programme data ~ 1 Cottons dry plus
Date: 21.05.2009 Start time: 11:30
Name: Smith
\

Optional modules

e
A
e
A
0 %
0 % e
A
e
A
e
A
25