Installing The Rgb Board - Toshiba Satellite T230 Maintenance Manual

4 Replacement Procedures
zuzuweisen, der hier angezeigt werden soll. Fehler! Verwenden Sie die Registerkarte 'Start', um
Text zuzuweisen, der hier angezeigt werden soll.
3. Lift the board up to an angle and then remove it from the logic lower assembly as
indicated in Figure 4.19.

Installing the RGB Board

Install the RGB Board according to the following procedures.
1. Insert the RGB board to the logic lower assembly at an angle as shown in Figure4.19 and
then press it down to seat it on the logic lower assembly.
2. Secure the RGB board with one M2x3 and one M2x6 screws and connect the FFC to the
motherboard.
Satellite/Satellite PRO T230 Maintenance Manual
Fehler! Verwenden Sie die Registerkarte 'Start', um
Figure 4.19 Removing the RGB Board
標題
2 dem Text
標題
2 dem
4-32