4 Replacement Procedures
zuzuweisen, der hier angezeigt werden soll. Fehler! Verwenden Sie die Registerkarte 'Start', um
Text zuzuweisen, der hier angezeigt werden soll.
2. Remove the two M2x3 screws and remove the HDD by pulling the tab attached to the
HDD.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
3. Place the HDD pack on a flat surface such as a desk.
4. Remove the four M3x3 screws and separate the bracket from the HDD.
Satellite/Satellite PRO T230 Maintenance Manual
Fehler! Verwenden Sie die Registerkarte 'Start', um
M2×3*2
Figure 4.3 Removing the HDD
標題
2 dem Text
標題
2 dem
4-12