Getting Started; Assembling Realtrax; Installing The Lock-On; Connecting The Transformer - Rail King 6-8-6 Bantam Turbine Steam Passenger Operation Manual

Getting Started

Assembling RealTrax

The quick connectors and built-in roadbed allow you to set up RealTrax anywhere,
including carpeted surfaces.
Knock-out must be removed
STEP
1 1
before remote lock-on can
be installed
Make sure the metal
STEP
4 4 contacts line up.
Connecting
Track Clips
If you prefer not to screw
your track to the table for
a permanent layout, use
the enclosed track clips
on adjoining curved
RealTrax sections to
secure them in place.

Connecting the Transformer

T he 75-w att power supply included with this set provides an
easy-to-use, safe power source for AC-powered trains and
accessories.
Plug the wire from the transformer into the remote
!
lock-on's center port, then plug the transformer into
the wall outlet.
Unplug when not in use.
!
RailKing 6-8-6 Bantam Turbine Steam Passenger Set with Proto-Sound® 2.0
4 4
®
Remove knock-out from
STEP
2 2
outer edge of track by
holding and twisting up
with a pair of pliers
REMOVE TAB
FROM OUTER EDGE
STEP
Align Quick
5 5
Connect Plugs
STEP
1 1
Line up the track clip
STEP
3 3
Insert lock-on into
knock-out tab
(Lock-on is the interface between
the track and transformer)
STEP
6 6
Gently push together RealTrax
STEP
2 2
Pop track clip in place.