Download Print this page

This Appliance Must Be Earthed - Baxi Combi 130 HE User Operating Instructions Manual

Gas fired wall mounted condensing combination boiler

Advertisement

IMPORTANT - Installation, Commissioning, Service & Repair
This appliance must be installed in accordance with the manufacturer's
instructions and the regulations in force. Read the instructions fully before
installing or using the appliance.
In GB, this must be carried out by a competent person as stated in the Gas
Safety (Installation & Use) Regulations.
Definition of competence: A person who works for a CORGI registered
company and holding current certificates in the relevant ACS modules, or
valid ACoP equivalents, is deemed competent.
In IE, this must be carried out by a competent person as stated in I.S. 813
"Domestic Gas Installations".
Lifting - This product should be lifted and handled by two people. Stooping
should be avoided and protective equipment worn where necessary. Carrying
& lifting equipment should be used as required.
The addition of anything that may interfere with the normal operation of the
appliance without express written permission from the manufacturer or his
agent could invalidate the appliance warranty. In GB this could also infringe
the Gas Safety (Installation and Use) Regulations.
Warning - Check the information on the data plate is compatible with local
supply conditions.
"Benchmark"
Installation, Commissioning and Service Record Log Book
Please ensure that your installer has completed the Installation and
Commissioning sections of the Log Book and hands the Log Book over. The
details of the Log Book will be required in the event of any warranty work.
Keep the Log Book in a safe place and ensure that the relevant sections are
completed at each subsequent regular service visit.
All CORGI registered installers carry a CORGI identification card and have a
registration number. Both should be recorded in your boiler Log Book. You
can check your installer is registered by telephoning +44 (0)1256 372300 or
writing to:-
Chineham Business Park,
Basingstoke. RG24 8WG
In GB the following Codes of Practice apply:
STANDARD
B.S. 6891
B.S. 5440: Pt 1
B.S. 5440: Pt 2
B.S. 5546
B.S. 7074
B.S. 5449: Pt 1
B.S. 6798
B.S. 5793
1 Elmwood,
Crockford Lane,
SCOPE
Gas Installation.
Flues.
Air Supply.
Installation of hot water supplies
for domestic purposes.
Expansion vessels and ancillary
equipment for sealed water systems.
Forced circulation hot water systems.
Installation of gas fired hot water
boilers.
Treatment of water in domestic hot
water central heating systems.
5.0 Legislation
5.1
Safe Installation
1. The appliance is suitable only for installation in
GB and IE and should be installed in accordance
with the rules in force.
In GB, the installation must be carried out by a
CORGI Registered Installer. It must be carried out
in accordance with the relevant requirements of:
· The G
S
AS
AFETY
R
EGULATIONS
· The appropriate B
Building Regulations, The Building Regulations
(Scotland), Building Regulations (Northern
Ireland).
· The W
F
ATER
B
in Scotland.
YELAWS
· The current I.E.E. W
· Where no specific instructions are given,
reference should be made to the relevant
BRITISH STANDARD CODES OF PRACTICE.
Reference should also be made to B
G
N
UIDANCE
OTES
D
G
OMESTIC
AS
In IE, the installation must be carried out by a
competent person and installed in accordance with
the current edition of:
· I.S.813 "D
OMESTIC
· The current B
· Reference should also be made to the current
ETCI rules for electrical installation.
2. This appliance must be installed in accordance
with the manufacturer's instructions and the rules
in force, and only used in a suitably ventilated
location.
3. Read the instructions before installing or using
this appliance.
4. Any purpose provided ventilation should be
checked periodically to ensure that it is free from
obstruction.
5.2
Electricity Supply

1. THIS APPLIANCE MUST BE EARTHED.

2. A standard 230V ~ 50H z supply is required. The
appliance must be protected by a 3 amp fuse.
In IE:
STANDARD
SCOPE
I.S. 813
Domestic Gas Installations.
The following BS standards give valuable additional information
B.S. 5546
Installation of hot water supplies
for domestic purposes.
B.S. 7074
Expansion vessels and ancillary
equipment for sealed water systems.
B.S. 5449
Forced circulation hot water systems.
Treatment of water in domestic hot
B.S. 7593
water central heating systems.
(Installation and Use)
.
R
either the
UILDING
EGULATIONS
R
W
ITTINGS
EGULATIONS OR
ATER
R
.
IRING
EGULATIONS
RITISH
F
T
I
O
OR
HE
NSTALLATION
F
C
B
.
ONDENSING
OILERS
G
I
".
AS
NSTALLATIONS
R
.
UILDING
EGULATIONS
G
AS
9

Advertisement

loading