How To Use The Front Panel; Program Start; Programme End; Rinse Hold - Hisense HWFE7510 User's Operation Manual

Notes:
. .
Keep detergents and additives in a safe, dry place out of the reach of children.
Liquid detergents can be used for programmes with pre-wash. However, in this
.
case a powder detergent must be used for the main wash.
Do not use liquid detergents when activating the " Delay " function (if available
.
on your washing machine).
To prevent dispensing problems when using highly concentrated powder and
liquid detergents, use the special detergent ball or bag supplied with the
.
detergent and place it directly inside the drum.
When using descaling agents, bleaches or dyes, make sure that they are suitable
for washing machines. Descalers could contain compounds that can damage
. .
parts of your washing machine.
Do not use any solvents in the washing machine (e.g. turpentine, benzine).
If you use starch powder, proceed as follows:
1.Wash your laundry using the desired wash programme.
2.Prepare the starch solution according to the starch manufacturer's instructions.
3.Select the "Rinse + Spin " programme, reduce the speed to 800 rpm and start the
programme.
4.Pull out the detergent drawer until you can see about 3cm of the mai n wash
.
chamber
5.Pour the starch solution into the main wash chamber
running into the detergent drawer.
6.If there are starch residues in the detergent drawer when the programme has
finished, clean the main wash chamber.

HOW TO USE THE FRONT PANEL

Program Start

.
.
Open the tap, add detergent, load the drum and close the door.
Turn the selector to choose the right wash cycle for the type of fabric you are
washing. These program are including cotton, Synthetics, Delicate, Wool,
.
Intensive,Quick, Rinse+Spin and Spin.
You can set up manually the spin speed, temperature, rinse hold, extra rinse, Eco
. . .
and prewash.
Press the" Start/Pause" button to start the program
The time display shows the remaining of the programme time.

Programme End

When programme finished its running, it will display"
for 2 seconds to turn off the machine,otherwise if no operation is taken in 30
the machine will turn off automatically.
. .
Close the tap.
Open the door and take the washed clothes out.
.
Slightly open the door to remove moisture in the pump.
9
while the water is
.
end ",user can press Power button
seconds,

SELECT ANY DESIRED PUSH BUTTON OPTION:

Press the selected push button option once, and the corresponding indicator lights
turns on.
If the selected programme and option cannot be combined,these functions will be
disabled automatically and indicator will turn off automatically.
The picture is only for reference and it might be different on each model

Rinse Hold

" "

If you select Rinse Hold , the laundry remains in the last rinse water without
progressing to the final spin cycle, to avoid creasing and prevent colours
fading.

It is recommended to select this function when washing synthetic or delicate
cloths.

If you want to delay the spin, selecting this function will be useful.
Note:When the programme runs to the step before the spin, the machine will delay
spinning.
To cancel the Rinse Hold function
 " "
Press the Start/Pause button or the Option button, and then the washing
machine will start spinning progress automatically. When spinning finishes,
the programme will end automatically.

Extra Rinse

Adding extra number of rinse to prolong rinse time.

The function is suitable for areas with soft water, or to wash baby cloth, or for the

people with allergies.
If this function is selected, Eco wash option will be disabled.

" "
10