Controls & Functions - Princeton EO710F Reference Manual

CLOSER LOOK
From left to right:
"MENU" button
"UP" button
"DOWN" button
"ENTER" button
Controls & Functions
Base of Unit
Assemble the tilt/swivel base onto the bottom of the monitor.
Turn the monitor for a comfortable viewing angle within 80
degrees horizontally and 20 degrees vertically.
Signal Cable (VGA Cable)
Connect the end of the signal cable to your graphics card on
your computer.
Power Input (AC)
Connect the AC outlet with the supplied power cord as shown
on page 3.
Power Button
Press this button to turn the power ON or OFF. There will be a
short delay before the display appears.
Control & Functions Buttons
Press "MENU" button to activate OSD menu.
Press "Up/Down" buttons to scroll through the selection.
Press "Enter" button to execute the selection.
Adjustment Buttons
Pressing the "Up/Down" buttons are used to adjust picture
adjustment or to highlight a selection.
4