Installation - Princeton EO710F Reference Manual

Installation

No tools are required to install the EO710f. Simply follow the
instructions outlined in the next few pages.
Connect Power Cord
Connect the female end of the power cable to the power input
receptacle on the back panel of the EO710f. Then, plug the
male end of the power cable into an AC outlet.
Connect Signal Cable
Attach the loose end of the signal cable to the graphics card.
Be cautious in inserting the cable properly into the graphics
card. If the cable does not seem to fit, it may be facing
the wrong direction. Turn the cable over and try to match
the shape of the connector with that of the graphics card.
Power On
Switch ON the power to both the EO710f and your computer.
There will be a short delay before the display appears.
Adjust the Picture
Adjust the controls, if necessary, to obtain the best display.
Instructions on how to use the On-Screen Display controls and
the Auto Setup button may be found in the next section, "Con-
trols and Functions."
3