P2Store Manager Screens - Panasonic AJ-PCS060G Operating Instructions Manual

P2Store Manager screens

Overview of screens
HDD page
This page allows confirmation of the partition information of the internal HDD of the unit and the
setting of the format and mounting method.
(The mounting method setting is a function only for Windows.)
Partition information section
Displays partition information for data copied
from P2 cards.
No.
Displays the partition number.
Drive mount point
Displays the assigned drive letter or specified
folder name.
If the drive letter or folder name is not
displayed properly, either disconnect and
then re-connect the USB cable or restart the
computer, and check again.
Page tabs
Click the tabs to access different pages.
Page display area
Displays sections with various information about
the unit and buttons for operations.
State display area
Displays "State: Connecting" when the unit is
connected to the computer, otherwise, "State:
Disconnected."
Status
Displays the partition status.
"OK": Normal
"ERROR": Trouble occurred at some point
during the copying or verification
process.
Serial No.
Displays the source P2 card serial number.
Capacity
Displays the source P2 card capacity (in
MB).
Date
Displays the date of copying.
Model No. (Ignore for PowerPC-based Mac
OS X computers.)
Displays the model number of the P2 card
being copied.
Quick format button
For quick formatting of the internal HDD, do the
following.
1. Click the [Quick format] button
A confirmation dialog is displayed, prompting
you for approval for formatting.
2. Click [Yes] to execute quick formatting
(Continued on next page)
1), 2)
E-24