Multi-Site Network With Complex Dialing Scheme; Configuration Of Managing Device - New Rock Technologies OM4 Administrator's Manual

OM Series IP Telephony System
Item
Pilot number
Step4 Add other devices to the list
Click Add to input information of other devices in the network.
Step5 Broadcast the device list
The managing site, which is on the top of the list, will send the latest device list to other devices
in the network.
Regular Site
Step1 Select multi-site network form
Go to the Multi-site page and select Simple. See Figure 5-1.
Step2 Enable the auto discovery
Step3 Add managing device to the list
Click Add to input relevant information of managing site. See Figure 5-3.
Step4 Add this device to the list
Click Add to input information of the device.
Step5 Get the latest device list from managing site
The managing site, which is on the top of the list, will send the latest device list to other devices
in the network.

5.2 Multi-site Network with Complex Dialing Scheme

In this scheme, special dialing digits are added at the front and the end of the destination number to avoid
potential dialing number conflict. With this form, a large scaled multi-site telephony network can be built
up, in which the numbering plan of each device can be managed independently.

5.2.1 Configuration of Managing Device

The managing device is one of the devices in the multi-site telephone network, which is responsible to
Authenticate the devices in the network

Maintain and broadcast the latest address information of devices

Make change and broadcast the site prefix information

 Make change and broadcast the outbound trunk sharing information
Response to the inquiry of the above information from other devices in the network

The procedure of configuring the managing device is illustrated below.
Step1 Input the domain name of the managing device
Go to the Basic > Domain name page. Enter IP address of managing site and click Submit.
www.newrocktech.com
Description
Enter the pilot number of this device. When the IP connection is disconnected, the inter-site
calling will be routed via PSTN.
Administrator Manual
5-3