Thermostat Operation - White Rodgers UP310 Install Manual

6.2 Thermostat operation

Set Current Time and Day
Note: Time icons will flash at initial power up or after a reset.
1. Press Menu
2. The time icon will be flashing, Press Next to advance and set the time
3. Use or to set the correct time
4. Press Next and use
5. Press Exit when finished.
The default program is 5-1-1 Day, but can be setup as a 7-Day or Non-Programmable thermostat (refer to the
User Menu on pages 25-26)
• Hold Temperature (bypassing the schedule) – With the System set to Heat or Cool, momentarily press the
Hold/Run button. Hold will be displayed. Use
room temperature at the selected setting until you press Hold/Run again to start program operation (cancels
permanent Hold).
or to set the correct day
or to adjust the temperature. The thermostat will hold the
27