Temperature Selection - Mercury Mountaineer 2001 Owner's Manual

Controls and features
When in AUTOMATIC and weather conditions require heat, air will be
sent to the floor. However, if the engine is not warm enough to provide
heat, the fan will be at a low speed and the air will be directed to the
windshield. In 3 1 ⁄ minutes or less, the fan speed will start to increase
2
and the airflow location will change to the floor area.
If unusual conditions exist (i.e.-window fogging, etc.), the manual
override controls allow you to select airflow locations and the fan control
allows you to adjust fan speed as necessary.

Temperature selection

The display window indicates the
F
˚
selected temperature, function
AUTO
(AUTO or one of the override
controls) and manual control of fan
speed ( ) if automatic fan speed is not desired.
To control the temperature, select
any temperature between 18°C
(65°F) and 29°C (85°F) by pressing
the blue (cooler) or red (warmer)
buttons.
REAR FAN OFF
MAX A/C VENT PNL • FLR
For continuous maximum cooling, push the blue button until 16°C (60°F)
is shown in the display window. The EATC will continue maximum
cooling (disregarding the displayed temperature) until a warmer
temperature is selected by pressing the red button.
For continuous maximum heating, push the red button until 32°C (90°F)
is shown in the display window. The EATC will continue maximum
heating (disregarding the displayed temperature) until a cooler
temperature is selected by pressing the blue button.
27