Turn Signal; High Beams; Anti-Theft System; Charging System - Mercury Mountaineer 2001 Owner's Manual

Instrumentation

Turn signal

Illuminates when the left or right
turn signal or the hazard lights are
turned on. If one or both of the
indicators stay on continuously or
flash faster, check for a burned-out
turn signal bulb. Refer to Bulbs in the Maintenance and care chapter.

High beams

Illuminates when the high beam
headlamps are turned on.
Anti-theft system (if equipped)
Refer to SecuriLock
passive
anti-theft system in the Controls
THEFT
and features chapter.

Charging system

Illuminates when the ignition is
turned to the ON position and the
engine is off. The light also
illuminates when the battery is not
charging properly, requiring
electrical system service.
Check gage
Illuminates when the engine coolant
CHECK
temperature is high, the engine oil
GAGE
pressure is low or the fuel gauge is
at or near empty. The ignition must
be in the ON position for this lamp to illuminate. The lamp will also stay
illuminated after the ignition is turned to the ON position. Refer to
Engine coolant temperature gauge, Engine oil pressure gauge or
Fuel gauge in this chapter for more information.
11