Janome memory craft 15000 Instruction Manual page 101

Janome 15000 Instruction Manual
!4
!5
!6
www.toews.com
!4 Bobbin winding speed
If you wish to wind the bobbin thread more quickly or
slowly, you can adjust the maximum bobbin winding
speed by pressing the corresponding key.
!5 Formatting the memory
If the internal memory of the machine or USB ash drive
does not function due to damage to the memory bank,
you need to re-enable it by formatting the memory.
To format the machine's internal memory, press the
machine icon key and a conrmation message will
appear. Press the OK key to format.
To format a USB ash drive, press one of the USB icon
and the conrmation window will open. Press the OK key
to format.
CAUTION:
Do not turn off the power or disconnect the USB ash
drive while a warning message is displayed otherwise
it may damage the memory bank.
!6 Reset All to Defaults
Press the Yes key to reset all the parameters except
wireless LAN settings to the original values (factory
settings).
Press the OK key to register the new menu.
96
Janome Memory Craft 15000
MC15000 Owners Manual/ User Guide