Setting The Fabric In An Embroidery Hoop - Janome memory craft 15000 Instruction Manual

Janome 15000 Instruction Manual
z
x
r
c
y
v
b
u
www.toews.com

Setting the Fabric in an Embroidery Hoop

q
z Prepare a fabric and attach a stabilizer to the wrong
w
x Lay the inner hoop and template on the fabric,
e
c Loosen the hoop tightening screw on the outer hoop.
v Push the inner hoop and fabric into the outer hoop.
t
b Clamp the fabric to the hoop with the short magnetic
i
112
side of the fabric.
The fabric and stabilizer should be larger than the
hoop size.
Draw the centerlines on the fabric with tailor's chalk.
q Fabric
w Centerlines
matching the centerlines of the fabric with the
template.
e Inner hoop
r Template
Place the inner hoop and fabric on the outer hoop.
t Hoop tightening screw
y Outer hoop
Tighten the screw on the outer hoop to stretch the
fabric. Make sure that the fabric is stretched tightly in
the hoop.
Remove the template.
NOTE:
Make sure to match the alignment marks of the outer
and inner hoops when stretching the fabric.
u Alignment marks
clamps when using hoop SQ23 or hoop GR.
Use the long magnetic clamps when using hoop
ASQ22.
i Magnetic clamp (short)
NOTE:
Thick layers of fabric and stabilizer may cause
skipped stitches, or broken threads and needles.
Avoid sewing on the layers thicker than 3 mm (1/8).
Janome Memory Craft 15000
MC15000 Owners Manual/ User Guide