Border Designs - Janome memory craft 15000 Instruction Manual

Janome 15000 Instruction Manual
z
x
c
v
b
n
www.toews.com
q
e
e
y

Border Designs

Border design patterns SQ14-145 to SQ14-146 can be
accurately connected to each other with the built-in
marking points.
Example: Connecting border design patterns SQ14-145
and SQ14-146.
z Print template sheets on semi-opaque paper for
border design patterns SQ14-145 and SQ14-146 by
using Horizon Link Suite.
w
q Template sheet
x Place the template sheet on the fabric and mark the
end points of the centerlines with tailor's chalk. Draw
centerlines on the fabric.
The horizontal line should be long enough to connect
the next patterns.
w Centerlines
c Set the fabric in the hoop and attach the hoop to the
carriage.
Select border design pattern SQ14-145 and adjust the
hoop position with the jog keys.
Press the start/stop button and a message will appear
asking you to sew the rst marking points.
Press the X key to skip sewing them and press the
start/stop button to start sewing.
r
v When nished sewing the design pattern, a message
for the last 2 marking points will appear.
Press the OK key and press the start/stop button to
sew the last 2 marking points.
e First marking points
r Last marking points
r
b Remove the hoop from the carriage and remove the
fabric from the hoop.
Place the template sheet on the fabric.
Align the marking points of the sewn pattern and
template sheet.
NOTE:
If semi-opaque paper is not available, print the
template sheet on plain paper and cut the left side
at the marking points (along the broken line in the
t
illustration).
n Mark the end points of the vertical centerline for the
second pattern.
t Marking points
y Vertical centerline
142
Janome Memory Craft 15000
MC15000 Owners Manual/ User Guide