Conditional Access; Ca Setting; Common Interface; Application - Edision DV3 T2 User Manual

12. Conditional Access

12.1 CA Setting

We provide one CA slots for user to use. Receiver has
build in smart card module with CONAX system. By
using cards in this system provided by operators, it is
possible to watch many scrambled channels coded in
this system. This menu shows detailed information
about cord inserted into cord reader module. It allows
inserted according to help messages visible on the
bottom of the screen.
Note:
All information showed in this menu and submenus are
coming from inserted card. In case if anything is wrong,
it could be card problem. After inserting the card
correctly at any time, a message-box will show on the
screen with message about detecting the card, in "card
info" menu all available information will be displayed.
You can press [left/right] key to set the message display
time
12.2

COMMON INTERFACE

We provide two CI slots (option, some model only has
one slot) for user to use. Using different CAM & cards
provided by different CAS operator, user can view many
type or scrambled channels.
We provide this menu to display the detail information of
the CAM & cards inserted in the slots. User can check all
this information according to the help message at the
bottom of each menu.
Note:
All information showed in this menu and submenu is
abstract from CAM & card. In case something is wrong,
it may be the problem of CAM or card.
When you insert the CAM correctly at any time, a
message will show in the screen to tell you that which
CAM has been detected by the receiver and is available
now.
CI Message
It is used to turn on or turn off the CI info display function
by using , buttons or "OK" button to select.
ON: To display the CI info.
OFF: Don't display the CI info.

13. Application

If you enter to the "Application" Menu, you will see the
picture like the below:

13.1 YouTube

This menu is some internet applications. "YouTube" can
27