Lnb Power - Edision DV3 T2 User Manual

Piccollo 3in1 plus ci high definition receiver
Table of Contents

Advertisement

DiSEqC
DiSEqC: You can use [Left/Right] key to switch options.
There are several options for your selection:
a) Disable: without DiSEqC.
b) 1/2, 2/2: two ports DiSEqC
c) 1/4, 2/4, 3/4, 4/4: 4 ports DiSEqC
d) 1/8, 2/8... 8/8: 8 ports DiSEqC
e) 1/16, 2/16....16/16: 16 ports DiSEqC
Positioner
Positioner: In the "Positioner" item, you can press
[Left/Right] key to switch "Off / DiSEqC 1.2 / USALS"
functions.
22K
You can use [Left/Right] key to switch "ON / off". When
this item is switched to "ON", receiver will receive TV
and radio input signal from 22K port. If the item is
switched to "Off", the receiver will receive all signals
port.
from 0K
! Notice
When you choose LNB type "Universal", you cannot
modify 22K.
0/12V
You can use[Left/ Right]key to switch "on /off".
Polarity
In "Polarity" item, [Left/Right] key to switch "Auto / H / V"
functions.
Tonebusrt
In "Toneburst" item, you can press [Left/Right] key to
switch "Off/On" functions.

LNB Power

In "LNB POWER" item, you can press [Left/Right] key to
On/Off
switch:"
" functions.
TP Edit
When you enter to "TP Edit" menu, there will display the
screen like below:
1.
In "Satellite" item, press [Left/Right] key to switch
satellite that you want to scan or press [OK] key
to enter satellite list for selection.
In "TP Index" item, you not only can use
2.
[Left/Right] key to select transponder but also
can use [Add] and [Delete] functions.
3.
When you press [Green] key, it will display "New
TP" in "TP Index" item; you should set the
parameters of "TP Frequency" and "Symbol
Rate" for this new transponder. The parameters
of "TP Frequency" and "Symbol Rate" can set by
number keys. The available range are
"3000~13450 MHz" and "1000~45000Ks/s".
4.
When you press [Yellow] key, there will show up
a warning message for reminding whether you
will delete the current transponder or not. If you
select "Yes", the current transponder will be
deleted, and the total account of transponder will
reduce 1 correspondingly.
5.
When you press [Blue] key, there will show up a
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv3 s2Dv3 c

Table of Contents