Graco Pro Xp L40T10 Instructions - Parts Manual page 22

Gun Setup
The floor of the spray area:
•
conductive and grounded. Do not cover the floor
with cardboard or any non-conductive material
which would interrupt grounding continuity.
Flammable liquids in the spray area:
•
in approved, grounded containers. Do not use
plastic containers. Do not store more than the
quantity needed for one shift.
22
must be electrically
must be kept
All persons entering the spray area:
•
shoes having conductive soles such as leather,
or wear personal grounding straps. Do not
wear shoes with non-conductive soles such as
rubber or plastic. If gloves are necessary, wear
the conductive gloves supplied with the gun. If
non-Graco gloves are worn, cut off fingers or palm
area of gloves to ensure your hand contacts the
grounded gun handle.
Key to Figs. 12–15
Fig. 12 Operator is grounded through
bare skin contact with the gun
handle and conductive shoes. A
conductive glove can also be used.
Fig. 13 Object being sprayed is grounded
through contact with the hanger
and conveyor system.
Fig. 14 Gun is grounded through the
conductive air hose.
Fig. 15 Fluid supply line and source must
be grounded.
must wear
3A2494E