Flavel Raglan KBFC**MN User Instructions page 6

CLEANING THE GLASS PANEL
To clean the glass panel, first ensure that the fire is cool, please note that the
glass panel will remain hot for a considerable period when the fire has been
switched off.
To remove the glass panel, follow the instructions over page for removal and
re-fitting.
The glass panel should be cleaned gently with a soft damp cloth and glass
cleaner.
DO NOT UNDER ANY CIRCUMSTANCES ATTEMPT TO CLEAN THE GLASS
PANEL WHEN THE APPLIANCE IS RUNNING.
FOLLOWING CLEANING OF THE GLASS PANEL, ALWAYS ENSURE THAT THE
ALLEN KEY IS REMOVED FROM THE ALLEN BOLTS AND REPLACED INTO
ITS LOCATION AT THE BOTTOM LEFT HAND SIDE OF THE FIREBOX.
REMOVING & REFITTING OF THE GLASS FRAME.
Fig. 1
a) Remove the brass trim, ashpan cover and fret from the firebox.
b) Remove the pilot heat shield, which is held in place at each end by
1 screw.
c) Remove the top infill panel by sliding it upwards out of the clips.
(See Fig. 1)
6