Adjusting Measures And Torques For Bw7 - Bukh DV36/48 Workshop Manual

R6
Designition
Axial tightening of tapered
roller bearings on input
and output shafts
Axial clearance
Sliding sleeve in
shifting fork
Axial clearance
Sliding sleeve in
shifting fork incl.
permissible wear
Axial clearance
"AHEAD" and "ASTERN"
wheels
Disc / plate clearance
per disc clutch
Disc / plate clearance
per disc clutch with max.
wear
Tightening of disc springs
Testing indication for
pressure
spring 0732 041 225 in
star bolts
009W2229

Adjusting Measures and Torques for BW7

Statement of
dimensions
0.03 – 0.08 mm
With a load of
30 N (3 Kp)
0.1 – 0.4 mm
Max. 0.8 mm
0.1 – 0.4 mm
0.9 – 1.0 mm
1.5 mm
Min. 1.1 mm
L = 15.5 mm
P = 38.9±2.4 N
(3.89±0.24 Kp)
Gauge
Dial indicator Adjusted by means of washer (s)
or under bearing outer ring in the
Depth
micrometer The bearings are fitted with
Feeler gauge
Feeler gauge
Depth "AHEAD": Clearance appears
measure when fitting and is examined
"ASTERN": Clearance can be
Adjusted by means of a thrust
Feeler gauge To be measured two places
To be adjusted by washer
Feeler gauge To be measured two places
To be adjusted by washer
Depth Measured on disc springs
measure when slack on the output shaft
Depth L = length of loaded spring
measure
Weight
Remarks
housing.
Loctite 601
New gear
Clearance + wear limit
at control.
washer
opposite one another.
opposite one another.
P = spring power