Storage Box; Telescoping Rod - Mercedes-Benz 2009 E-Class Operator's Manual

Controls in detail
Loading and storing
X
Place load between the cargo belt and the
side wall of the cargo compartment.
X
Press locking button on belt reel 1.
3
With the other hand, slowly pull cargo belt
over load until the load is properly secured.

Telescoping rod

The telescoping rod can be used to tighten
the load against the rear seats so as to secure
it from slipping.
Telescoping rod
1
Mounting element
2
X
Insert one mounting element
cargo rail.
X
Turn mounting element in the cargo rail
2
to N.
212
X
Insert telescoping rod
element 2.
X
Turn mounting element
until it engages in position j.
You should be able to feel mounting
element
2
Storage box in cargo compartment
(wagon, Canada only)
G Warning!
When you are using the storage box in the
cargo compartment, the seat backrests of
the seats in front of it must be completely
engaged to the rear, and the twin roller
blind must be installed.
Do not exceed the storage box's maximum
load of 44 lb (20 kg), as it could otherwise
become detached during an accident or
sharp braking maneuvers, and could injure
you or other passengers.
into each
2
into mounting
1
in the cargo rail
2
engage in the cargo rail.
The storage box in the cargo compartment is
covered by the rear seat bench.

Storage box

1
Cargo compartment floor
2
Seat backrests
3
Locking hooks
4
X
Installing: Fold seat backrests
( Y page 207).
X
Insert storage box from within the cargo
1
compartment with the opening pointing in
direction of travel.
X
Press locking hooks of storage box
4
into the space between seat backrests
and cargo compartment floor 2.
X
Fold seat backrests to the original
3
position ( Y page 208).
forward
3
1
3