Mercedes-Benz 2009 E-Class Operator's Manual page 353

X
Pull the bulb out of bulb socket 4.
X
Gently press the new bulb into bulb socket
4.
X
Place bulb socket back into the housing
4
and turn it clockwise until it engages.
X
Align housing cover and turn it
1
clockwise until it engages.
High-beam and high-beam flasher bulb
(halogen headlamps)/high-beam
flasher bulb (Bi-Xenon headlamps)
X
Turn bulb socket with the bulb
2
counterclockwise and remove it.
X
Pull the bulb out of bulb socket 2.
X
Gently press the new bulb into bulb socket
2.
X
Place bulb socket back into the housing
2
and turn it clockwise until it engages.
Front turn signal lamp bulb
X
Turn bulb socket with the bulb
5
counterclockwise and remove it.
X
Gently press onto the bulb and turn it
counterclockwise out of bulb socket 5.
X
Gently press the new bulb into bulb socket
and turn it clockwise until it engages.
5
X
Place bulb socket back into the housing
5
and turn it clockwise until it engages.
Parking and standing lamp bulb
Halogen headlamps
X
Turn bulb socket with the bulb
3
counterclockwise and remove it.
X
Pull the bulb out of bulb socket 3.
X
Gently press the new bulb into bulb socket
3.
X
Place bulb socket back into the housing
3
and turn it clockwise until it engages.
Bi-Xenon headlamps
In vehicles with Bi-Xenon headlamps, the
bulbs of the parking and standing lamps are
LEDs.
!
Do not replace the LEDs yourself. You
could otherwise damage the LEDs or parts
of the vehicle. Only have the LEDs replaced
at an authorized Mercedes-Benz Center.
Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Tail lamp unit
The tail lamps are equipped with HiP bulbs
and LEDs. Have them replaced at an
authorized Mercedes-Benz Center.
G Observe Safety notes, see
page 348.
License plate lamps
Example illustration: Sedan
Screws
1
Lamp cover
2
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
M.
X
Open the trunk.
Z
351