Mercedes-Benz 2009 E-Class Operator's Manual page 208

Controls in detail
Loading and storing
Seat cushion
1
Seat backrest
2
X
Grab the back of seat cushion
forward.
X
Push the rear seat head restraints all the
way in.
X
If the rear center seat is to be occupied
while driving, it may be necessary to fold
the seat belt buckle up again.
206
X
Pull the handle in the trunk.
Seat backrest
restraints fold back.
and fold
1
X
Fold seat backrest
! Make sure the head restraints fit all the
way into the seat cushion pockets. This will
prevent the seat backrests from being
damaged during loading.
Returning rear seat backrest to original
position
G Warning!
Always lock seat backrest in its upright
position when rear seat bench is occupied,
or the extended cargo volume is not in use.
Check for secure locking by pushing and
pulling on the seat backrest.
is released and the head
2
forward.
2
In an accident, during hard braking or
sudden maneuvers, loose items will be
thrown around inside the vehicle, and
cause injury to vehicle occupants unless
the items are securely fastened in the
vehicle.
To help avoid personal injury during a
collision or sudden maneuver, exercise
care when transporting cargo.
Seat cushion
1
Seat backrest
2
X
Fold seat backrest rearward until it
2
engages.