Samsung UD46E-A User Manual page 92

Preventing afterimage burn-in
― The best way to protect the product from afterimage burn-in is switching the power off or setting the
PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending
on instruction guide.
• Powering Off, Screen Saver and Power Saving Mode
- Power off the product for 2 hours after using it for 12 hours.
- Go to Display Properties > Power Supply on your PC and set the product to power off as
required.
- Using a screen saver is recommended.
It is best to use a single-color or moving-image screen saver.
• Regular color Change
- Use 2 colors
Switch between 2 colors every 30 minutes as shown above.
Type 1
FLIGHT TIME
OZ348 20:30
UA102 21:10
• Avoid combinations of a text color and background color of contrasting brightness.
(Brightness: refers to the lightness or darkness of a color which varies depending on the amount of
light emitted.)
― Avoid using grey as it may contribute to afterimage burn-in.
― Avoid using colors of contrasting brightness (black and white; grey).
:
FLIGHT TIME
:
OZ348 20:30
Type 2
FLIGHT TIME
OZ348 20:30
UA102 21:10
:
FLIGHT TIME
:
OZ348 20:30
• Regular Text color Change
- Use bright colors of similar brightness.
Interval: Change text color and background color every 30 minutes
:
FLIGHT TIME
:
OZ348 20:30
FLIGHT : TIME
:
OZ348 20:30
- Move and change text every 30 minutes as shown below.
:
FLIGHT TIME
:
OZ348 20:30
[ Step 1 ]
FLIGHT
- Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
:
FLIGHT TIME
:
OZ348 20:30
:
FLIGHT TIME
:
OZ348 20:30
[ Step 2 ]
:
TIME
:
OZ348 20:30
[ Step 3 ]
92