Page 1
LFD DISPLAY User Manual UD55D The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00372A-01...
Table of contents Before Using the Product Installing the Wall Mount Connection Using an HDMI-DVI Cable Preparing before installing Wall-Mount Connection Using an HDMI Cable Copyright Installing the Wall Mount Kit Connecting to an Audio System Wall Mount Kit Specifications (VESA) Safety Precautions Connecting an External Monitor Symbols...
Page 3
Table of contents Network Status Advanced features Dynamic Contrast Sound Adjustment Black Tone Wi-Fi Direct System Setup Flesh Tone Tool Settings RGB Only Mode Soft AP Other Functions Colour Space AllShare Settings Group Management White Balance Schedule Management 10p White Balance Device Name Troubleshooting Guide Gamma...
Page 4
Photos By USB Viewing a Photo (or Slide Show) General Alternative Software Max. Power Saving Music Game Mode Contact Samsung Playing Music BD Wise Contents Home Menu Transparency Videos / Photos / Music Play Option menu MagicInfo Lite Sound Feedback...
Page 5
File Formats Compatible with MagicInfo Appendix Read before using MagicInfo Lite player Videowall S Player Read before using MagicInfo Videowall S Player 206 Contact SAMSUNG WORLD WIDE Approving a connected device from the server MagicInfo Videowall S Responsibility for the Pay Service...
Safety Precautions Cleaning ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― Take the following steps when cleaning. Caution ― The following images are for reference only. Real-life situations may differ from what is shown in the images.
Storage Connect the power plug to a grounded power socket (type 1 insulated devices only). High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used • An electric shock or injury may result. nearby. ―...
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • A fire may result. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • A fire or electric shock may result.
Page 10
SAMSUNG • Be sure to consult Samsung Customer Service Centre if you want to install the product at such a place.
If the product is dropped or the outer case is damaged, turn off the power Do not lift or move the product by pulling the power cord or any cable. switch and disconnect the power cord. Then contact Samsung Customer Service Centre.
Page 12
• Your eyesight may deteriorate. when water or other foreign substances have entered the product. Then contact Samsung Customer Service Centre. • Product failure, an electric shock or fire may result. Do not hold the product upside-down or move it by holding the stand.
Page 13
Rest your eyes for more than 5 minutes for every 1 hour of product use. When replacing the battery, insert it with the right polarity (+, -). • Eye fatigue will be relieved. • Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid.
Chapter 02 Preparations Checking the Contents Cut the strap and open the box. Removing the Packaging ― The following images are for reference only. Real-life situations may differ from what is shown in the images. Remove the protective packaging from the box. Separate the box from the product.
Checking the Components - Contact the vendor where you purchased the product if any Components components are missing. - The appearance of the components and ― Components may differ in different locations. items sold separately may differ from the image shown. - A stand is not provided with the product.
Parts Buttons Description Aim the remote control towards this spot on the LCD Display. Remote Control ― Keep the area between the remote sensor and remote control obstacle-free. Sensor External sensor KIT Automatically detects the intensity of ambient light around a selected display and Light sensor adjusts the screen brightness.
Port Description Reverse Side IR OUT Receives the remote control signal via the external sensor board and outputs the ― The colour and shape of parts may differ from what is shown. Specifications are signal via LOOP OUT. subject to change without notice to improve quality. CONTROL IN Supplies power to the external sensor board or receives the light sensor signal.
Attaching the holders Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: Fix the cable of your anti-theft locking device to a heavy object such as a desk.
Remote Control ― Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not supported on the product. Power off the product.
Page 21
TOOLS INFO Quickly select frequently used functions. Display information about the current input source. Move to the upper, lower, left or right menu, or adjust an option's setting. Confirm a menu selection. RETURN EXIT Exit the current menu. Return to the previous menu. Manually select a connected input source from HDMI PC, DVI, HDMI, or DP.
Page 22
Adjusting the OSD with the Remote Control Remote Control Reception Range Buttons Description Open the OSD menu. Select from Picture, Network, System Support the displayed OSD menu screen. Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the left and right.
Connection Using an IR Stereo Cable (sold separately) ― Turn off the device before connecting the External Sensor Kit. After it is connected, turn on the device. Controlling more than one display product using IR OUT CONTROL IN your remote control •...
Tilting Angle and Rotation 15 ˚ ― Contact Samsung Customer Service Centre for further details. • The product can be tilted at a maximum angle of 15 from a perpendicular wall surface. • To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
Figure 1.3 Top view Installation on an Indented Wall ― Contact Samsung Customer Service Centre for further details. Plane view Minimum 40 mm Minimum 70 mm Minimum 50 mm Minimum 50 mm Ambient temperature: Under 35 C ― When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35 C.
We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
Samsung is not liable for these kinds of accidents. • Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
LAN Cable • RS232C cable Connector: 9-Pin D-Sub • Pin assignment Cable: Cross cable 1 2 3 4 5 6 7 8 -P1- -P1- -P2- -P2- Female --------> Female Pin No Standard Colour Signal <-------- ---------- White and orange Orange White and green Blue White and blue...
Page 30
Cross LAN cable (PC to PC) • Connector : RJ45 Direct LAN cable (PC to HUB) RJ45 MDC RJ45 MDC RJ45 MDC Signal Signal <--------> <--------> Signal Signal <--------> <--------> <--------> <--------> <--------> <-------->...
Command type Command Value range Control Codes Video Wall On 0x84 Viewing control state (Get control command) Video Wall User Control 0x89 Header Command Data length Checksum • All communications take place in hexadecimals. The checksum is calculated by adding up all 0xAA Command type values except the header.
Power control Volume control • Function • Function A product can be powered on and off using a PC. The volume of a product can be adjusted using a PC. • Viewing power state (Get Power ON / OFF Status) •...
Page 34
Input source control 0x24 HDMI2_PC • Function 0x25 DisplayPort The input source of a product can be changed using a PC. ― DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to • Viewing input source state (Get Input Source Status) "Get"...
Page 35
Screen mode control Header Command Data length Ack/Nak r-CMD Val1 Checksum • Function 0xAA 0xFF 0x18 "ERR" The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the Video Wall function is enabled. "ERR": A code showing what error has occurred ―...
Page 36
PIP On/Off control Auto adjustment control (PC and BNC only) • Function • Function The PIP mode of a product can be turned on or off using a PC. Automatically adjust the PC system screen using a PC. ― Only available on models that have the PIP function. •...
Video Wall Mode Control Safety Lock • Function • Function Video Wall mode can be activated on a product using a PC. PC can be used to turn the Safety Lock function on or off on a product. This control is only available on a product whose Video Wall is enabled.
Page 38
Video Wall On Video Wall User Control • Function • Function Turn Video Wall on or off on the product from your computer. Turn the Video Wall function on or off on the product from your computer. • Get Video Wall On/Off Status •...
Chapter 03 Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product Pre-connection Checkpoints include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. ―...
Connecting to a PC • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. • A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC.
Connection Using an HDMI-DVI Cable Connection Using an DP Cable ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name DVI PC access video and audio content stored on the PC. DP OUT DVI OUT DP IN HDMI IN 1, HDMI IN 2 AUDIO OUT...
Changing the Resolution ― Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. ― The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display Settings, and change the resolution.
Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution, and change the resolution. Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution, and change the resolution.
Connecting to a Video Device • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. • You can connect a video device to the product using a cable. ―...
Connection Using an HDMI-DVI Cable Connection Using an HDMI Cable ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. Using an HDMI cable or HDMI to DVI Cable (up to 1080p) To resolve this, additionally connect an audio cable to the audio ports on the product and video device.
Connecting to an Audio System Connecting an External Monitor ― Connecting parts may differ in different products. ― Connecting parts may differ in different products. AUDIO DP IN DP OUT AUDIO...
Connecting the network box (Sold separately) ― For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase. MagicInfo To use MagicInfo, a network box (sold separately) must be connected to the product. ―...
Page 50
Enter the IP information. Select a display mode. MagicInfo Setup Wizard - v.1.12 MagicInfo Setup Wizard - v.1.12 Select TCP/IP - step 2 Select Screen Type - step 4 Obtain an IP address automatically Use the following IP address: Landscape IP address: 192 .
Changing the Input source Source allows you to select a variety of sources and change source device names. You can display the screen of a source device connected to the product. Select a source from source list to display the screen of the selected source. ―...
Chapter 04 Using MDC Configuring Settings for Multi Control DisplayPort daisy chain • To display the DP IN video input through the DP OUT output port, select a device connection method from Single Stream Transport (SST) and Multi Stream Transport (MST). Clone: In this Single Stream Transport (SST) output mode, the same screen output is displayed on MENUm→...
MDC Programme Installation/Uninstallation Installation MDC installation can be affected by the Insert the installation CD into the CD-ROM drive. graphics card, mother board and network conditions. Click the MDC Unified installation programme. Select a language for installation. Next, click "OK". If a software installation window is not displayed on the main screen, install with When the...
What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices Connecting to MDC simultaneously using a PC. Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. Monitor 1 RS232C IN Monitor 2...
Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB. RJ45 MDC Computer Monitor 1...
Page 56
Connection using a cross LAN cable ― Multiple products can be connected using the RS232C IN / OUT port on the product. Monitor 1 RJ45 MDC RS232C OUT Monitor 2 Computer...
Connection Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion.
User Login Launching the programme displays the user login window. The initial login ID (Username: admin) and password (password: admin) are set to admin. ― After logging in for the first time, make sure to change the password to ensure security. ―...
Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 to 99, and then finally to Set ID 0. ―...
Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window. ― To delete the settings you have configured, click the Paste Settings button.
Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10.
Getting Started with MDC To start the programme, click Start Programs Samsung Unified. The login window appears after the MDC programme is launched. Enter the user ID and password. • The default user ID and password are admin. • Make sure to change the password after the first login.
Main Screen Layout Change the status of a display device or the properties of the programme. Menu Bar View a list of connected display devices or device groups. Device Category View a list of schedules for display devices. Schedule Category Select the display device you want to adjust.
Page 64
― The volume can be changed or the sound can be muted only for displays that are turned on. Volume Volume • Adjust the volume of a selected display. • The volume can be adjusted using the slider bar in the range of 0 to 100. Mute •...
User Login User Settings • Add, delete or edit login information. Logout • Log out from the current user account as follows. • Click Logout. The message "Do you want to log admin out?" is displayed • Click Yes. The user login window appears. •...
Page 66
Color Color • Adjust the colours for the selected display device. Tint (G/R) • Adjust the tint for the selected display device. Color Tone • Adjust the background colour tone for the selected display device. Color Temp. • Adjust the colour temperature for the selected display device. ―...
Page 67
MPEG Noise Filter MPEG Noise Filter Reduces MPEG noise to provide improved picture quality. Medium High Auto • Smart LED Controls the LED backlight to maximize picture clarity. Cinema Black In Movie mode, this feature dims the top and bottom areas of the video image to provide a more immersive viewing experience.
Advanced features 3D Mode Select the 3D input format. 3D L/R Change Swap the left and right pictures. Displays the image for the left eye only. 3D Auto View 3D Control 3D Auto View Message Notice, a pop up message window appears when the product receives a 3D signal. If you set 3D Optimization The overall adjustment of 3D effect.
Page 69
Advanced Settings Dynamic Contrast Adjust the screen contrast. Gamma Control Adjust the primary colour intensity. RGB Only Mode Displays the Red, Green Blue colour for making fine adjustments to the hue and saturation. Flesh Tone Emphasize pink “Flesh Tone. ” Motion Lighting Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
Sound Adjustment You can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. Bass • Adjust the bass for the selected display. Treble • Adjust the treble for the selected display. Balance(L/R) Bass Treble - The...
Page 71
Format • Select the number of horizontal display devices. • Select the format to display the split screen. • A maximum of 15 displays can be arranged in a row. ― A maximum of 6 can be assigned to if 15 is assigned to H. •...
Page 72
General User Auto Color • Automatically adjust the screen colours. ― Available only in mode. Auto Power • Set the product to automatically power on. Standby Control • Set the standby mode to activate if an input source is not detected. Fan &...
Security Safety Lock • Lock the on-screen menus. ― To unlock the menus, set Safety Lock to Off. Button Lock • Lock the buttons on the display device. ― To unlock the buttons, set Button Lock to Off. OSD Display Source OSD •...
Page 74
Time Clock Set Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer On Timer • Repeat: Specify the period for which you want to repeat the selected Timer. Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual Holiday...
Holiday Management Holiday Management allows you to prevent devices that are set to be powered on by the Timer from turning on at a specified date. ― The Holiday Management function can be enabled or disabled in the Timer settings menu. •...
Page 76
Screen Saver This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Timer: You can set the timer for Screen Saver. • • Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals (Period).
Page 77
Safety Screen Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time.
Page 78
Ticker Input text while a video or image is displayed and display the text on the screen. Ticker Enable or disable Ticker. • Message Enter a message to display on the screen. Timer Start Time End Time Set the to display a message (Message). Position Horizontal and Vertical.
Tool Settings Panel Control: Turn on or off the screen of a display device. • Remote Control: Enable or disable the remote control. • Virtual Romete Control: Control a device from a PC using the virtual remote control. • Security Reset Reset Picture: Reset the screen settings.
Edit Column Configure the settings for the items that will be displayed on the list of displays. • Language: Select a language to use in the MDC programme. After selecting a language, restart the MDC programme to use the selected language. Options Command Retry Count: Specify the number of retry attempts when a command fails.
Page 81
Monitor Window A window appears showing details for data transfer between the computer and display devices. Filter • Information View the programme information.
Other Functions Resizing a Window Place the mouse pointer on a corner of the programme window. An arrow will appear. Move the arrow to customize the size of the programme window.
Group Management Create groups and manage the list of sets on a group basis. ― Duplicate group names cannot be used. Group Edit Creating Groups Right-click and select in the display device list section on the left side of the programme window. In the Edit Group window displayed, click...
Page 84
Add on the sub level: Create a sub-group under the selected group. • Enter the group name. Deleting Groups Select a group name, and click Edit. In the Edit Group window displayed, click Delete. Click Yes. The group will be deleted.
Renaming Groups Select a group name, and click Edit. Edit Group window displayed, click Rename. In the If a cursor appears in the old group name, enter a new group name. Rename Schedule Management Creating Schedules Create and register a schedule on a group basis. Click All Schedule List in the schedule section on the left side of the programme window.
Page 86
Click the button. The Add Schedule window will appear. Device Group Click below the item, and select the group you want to add a schedule to. Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list Select window.
Troubleshooting Guide - This programme may malfunction sometimes due to a communication Issue Solution problem between the PC and display or electromagnetic waves emitted from The display you want to control does not Check the connection of the RS232C cable (check that the cable is properly connected to appropriate serial port). nearby electronic devices.
Page 88
How display properties are shown when multiple displays are used When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3. When the All+Select checkbox is checked and all displays are selected: The default settings are displayed.
Chapter 05 Screen Adjustment Picture Colour Tone, etc.). Configure the settings (Backlight, Picture - The layout of the menu options may vary depending on the product. Picture Mode If the input source is PC, DVI or DisplayPort • Information: This mode reduces eye fatigue and is suitable for displaying information to the public. MENU m : T Picture...
Backlight / Contrast / Brightness / Your product has several options for adjusting picture quality. Input source Picture Mode Adjustable options Sharpness / Colour / Tint (G/R) PC, DVI, DisplayPort, HDMI1 Information Backlight Contrast Brightness (when a PC is connected), HDMI2 (when a Sharpness...
Screen Adjustment Picture Size choose size and aspect ratio picture displayed on screen. ― Different MENU Picture Screen Adjustment ENTER m : T Screen Adjustment options are displayed depending on the current input source. • 16:9: Sets the picture to 16:9 wide mode.
Position Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit or Custom. ― To use the Position function after selecting Zoom1, Zoom2, Wide Fit Screen Fit, follow these steps. Press the button to select Position.
4:3 Screen Size Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size. Screen Adjustment Custom Picture Size ·...
Resolution Select If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu. Available resolutions: 1024x768 1280x768...
Rotation Rotate the product screen orientation. • Landscape: Display the screen in landscape mode (default). • Portrait: Display the screen in portrait mode. MENU Picture Rotation ENTER m : T Picture Rotation Landscape · Aspect Ratio Full Screen - The displayed image may differ depending on the model. Aspect Ratio Set the rotated screen to be either full screen or original.
Advanced Settings Input Source Picture Mode Advanced Settings PC, DVI, DisplayPort, HDMI1 Information, Calibration White Balance Gamma (when a PC is connected), MENU m : T Picture Advanced Settings ENTER HDMI2 (when a PC is Advertisement Dynamic Contrast Black Tone Flesh Tone Colour Space connected)
Dynamic Contrast Advanced Settings Adjust the screen contrast. Dynamic Contrast Medium Medium High • Black Tone Black Tone Flesh Tone Select the black level to adjust the screen depth. RGB Only Mode Dark Darker Darkest • Colour Space Native Flesh Tone White Balance Emphasize pink Flesh...
White Balance Advanced Settings Adjust the colour temperature for a more natural picture. R-Offset G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness. • White Balance R-Gain G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness. • 10p White Balance •...
Expert Pattern Advanced Settings Use the Expert Pattern function to calibrate the picture. If the OSD menu disappears or a menu other than the Picture menu is opened, the product saves the calibration and the White Balance Expert Pattern screen disappears. •...
Picture Options Select an option using the and arrow keys, the press Use the arrow keys to change the setting, and then press Input source Picture Mode Picture Options m : T MENU Picture Picture Options ENTER Information Colour Tone Calibrated value Dynamic Backlight Picture Options...
Colour Tone Picture Options If the input source is PC, DisplayPort HDMI1 (PC connection), HDMI2 (PC connection). Standard Colour Tone Cool Standard Warm • If the input source is AV, Component, HDMI1, HDMI2 or DVI. 10000K Colour Temp. Cool Standard Warm1 Warm2 •...
Film Mode Picture Options This mode is suitable to view movies. Film Mode Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality. Auto1 Auto2 • Calibrated value Don't apply ―...
External Modem connected. (ADSL / VDSL) RJ45 Start Please plug in a network cable or a Samsung Wireless LAN Adapter. Cancel Modem Cable LAN Cable • You can attach your product to your LAN by connecting the LAN port on the back of your product to an IP Sharer which is connected to an external modem.
Wired Network Settings • Depending on how your network is configured, you may be able to attach your product to your LAN by connecting the LAN port on the back of your product directly to a network wall outlet using a LAN cable. Set the network connection to use Internet services such as perform software upgrades.
PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. ― If your router, modem, or device is not certified, it may not connect to the product via the “Samsung Wireless LAN adapter”.
― The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the product When the connection has been verified, the “Your wireless network and Internet connection with a USB hub or USB extension cable other than the cable supplied with the product.
WPS(PBC) If the router has security, enter the Security Key (Security Key or PIN). When done, use the right arrow button to move the cursor to Next, and then press . The How to set up using WPS(PBC) network connection screen appears and the verification process starts. If your router has a WPS(PBC) button, follow these steps.
Network Status Wi-Fi Direct MENU Network Network Status ENTER MENU Network Wi-Fi Direct ENTER m : T m : T You can check the current network and Internet status. Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a router.
Soft AP AllShare Settings MENU Network Soft AP ENTER MENU Network AllShare Settings ENTER m : T m : T Using this function, you can connect the product on your mobile devices if your mobile devices do not Shows a list of mobile phones or connected devices which have been set up to use the AllShare Play support Wi-Fi...
Chapter 07 System Multi Control Configuring settings for Multi Control ID Setup • Assign an ID to a set. (Range: 0~99) MENU m : T System Multi Control ENTER Press to select a number, and press Multi Control ID Input •...
Time You can configure Clock Set Sleep Timer. You can also set the product to automatically turn on or off at a specified time using the Timer function. Clock Set System Time MENU m : T ENTER Set the clock to use the various various timer features of the product. Time Clock Set •...
On Timer Time On Timer so that your product turns on automatically at a time and on a day of your choosing. On Timer The power is turned on with the specified volume or input source. Off Timer Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time first. (On Timer1 Timer7) Holiday Management...
Off Timer Time Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer1 Timer7) On Timer ― You must set the clock before you can use Timer. Off Timer • Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
Menu Language Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. m : T MENU System Menu Language ENTER System Time...
Eco Solution Energy Saving Reduce the power consumption by adjusting the screen brightness. m : T MENU System Eco Solution ENTER Selecting Picture Off switches off the screen. The volume is not disabled. To switch the screen on, press any button other than the volume button. Eco Solution Medium High...
Security Every time you access the Security functions, the PIN screen will appear and the default PIN number is "0-0-0-0" (default password: 0 - 0 - 0 - 0). Safety Lock m : T MENU System Security ENTER It sets safe lock function. Security •...
PIP Settings The picture from the external video source will be in the main screen and the picture from the product will be in the PIP sub- picture screen. m : T MENU System ENTER Main picture Sub picture System PC, DVI, HDMI1, HDMI2, DisplayPort, MagicInfo Lite Auto Protection Time...
Auto Protection Time If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the formation of burnt in ghost images on the screen. 2 hours 4 hours 8 hours 10 hours •...
Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. Pixel Shift Time setting allows you to program the time between movements of the picture in minutes. m : T MENU System...
Timer Screen Burn Protection You can set the timer for Screen Burn Protection. Pixel Shift Pixel Shift feature stops automatically after a specified period of time. Timer Timer Immediate display • Side Grey • Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period).
Immediate display Screen Burn Protection Select the screen saver you want to display immediately. Pixel Shift Pixel Rolling bar Fading screen • Timer Side Grey Immediate display When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen. Side Grey Light Dark...
Video Wall Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide.
Vertical Video Wall This function automatically divides the screen according to the specified number of vertical displays. Video Wall Enter the number of vertically arranged displays. Format Full · The vertical screen will automatically be divided according to the number entered. A maximum of 15 displays can be assigned to the vertical arrangement.
Source AutoSwitch Settings Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. Source AutoSwitch m : T MENU System Source AutoSwitch Settings ENTER When the...
Auto BD Wise Wise. When Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which support Wise is turned On, the picture mode is automatically changed to the optimal resolution. - The displayed image may differ depending on the model.
Sound Feedback General Your product gives sound feedback when you use product. Sound Feedback Sound Feedback is enabled by default. Turn off Sound Feedback or adjust its volume. Auto Power This function is enabled by default. The volume can be adjusted or muted. ―...
Lamp Schedule General Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode. Sound Feedback • Auto Power OSD Display Standby Control Auto Lamp Schedule Displays or hides a menu item on the screen. ―...
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your...
Auto Turn Off Anynet+ (HDMI-CEC) Anynet+ Setting an Device to turn automatically when the product is turned off. Anynet+ (HDMI-CEC) • Auto Turn Off ― If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off. ―...
Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI cable connections. •...
Page 132
Problem Possible Solution The connected device is not • Check whether or not the device supports Anynet+ functions. displayed. • Check whether or not the HDMI cable is properly connected. Anynet+ (HDMI-CEC) Anynet+ Setup • Check whether is set to in the menu.
DivX® Video On Demand Shows the registration code authorized for the product. If you connect to the DivXⓇ web site and register using that code, you can download the VOD registration file. For more information about DivXⓇ VOD, visit “http://vod.divx.com”. m : T MENU System...
Magic Clone Export the product settings to a USB device or load the settings via a USB device. This option is useful when assigning the same settings to several products. Clone to USB: Copy the product settings to a USB device. •...
Reset All This option returns all the current settings for a display to the default factory settings. m : T MENU System Reset All ENTER System Reset All - The displayed image may differ depending on the model. PC module power The PC module can be turned on/off separately from the LFD.
Chapter 08 Support Software Update m : T MENU Support Software Update ENTER Software Update menu lets you upgrade your product software to the latest version. Current Version: This is the software ― Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software upgrade. version already installed in the product.
Contact Samsung m : T MENU Support Contact Samsung ENTER View this information when your product does not work properly or when you want to upgrade the software. You can find information regarding our call centres and how to download products and software.
Contents Home MagicInfo Lite m : T MENU Support Contents Home MagicInfo Lite ENTER ― m : T MENU Support Contents Home ENTER MagicInfo Lite can also be accessed by pressing MagicInfo Lite/S on the remote control. ― To launch MagicInfo Lite, select MagicInfo Lite...
AllShare Play m : T MENU Support Contents Home AllShare Play ENTER Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device. ― Refer to P.140 for details about the AllShare Play menu. Source MENU m : T Support Contents Home Source...
• Before connecting a USB device to the product, back up files to ensure your data is not damaged or lost. Samsung Electronics is not liable for any damage or loss of data. • Do not remove a USB device while it is loading.
Page 141
Compatible devices with AllShare Play • Some types of USB devices, digital cameras and audio devices may not be compatible with the product. AllShare Play is only compatible with USB MSC devices. • • MSC device refers to a Mass Storage Class Bulk-Only Transport device. Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs.
Using a USB device Connecting a USB device Turn on your product. It is recommended to use a USB HDD that has a power adapter. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. A message New device connected.
Settings. • To view content saved on the PC, connect the product and PC to the same wireless router and visit http://www.samsung.com to download the AllShare PC software. • Ensure the product and PC are connected to the same network subnet.
• Compatibility with various subtitle formats (SRT, SMI, SUB, TXT, TTXT) • Search with file names • And many others ― A compatibility issue may occur if a video file is played when a server not provided by Samsung Electronics is connected. ― To use AllShare...
Using the Basic AllShare Play Sorting the file lists Features To sort files, press on the remote control to specify the sorting criteria. Sort Criteria Operation Videos Photos Music MENUm → Support → Contents Home → AllShare Play → ENTERE Folder view Displays the whole folder.
Playing Selected Files Creating a Playlist Select files from the list of Videos, Photos, or Music Select files from the list of Videos, Photos, or Music files. files. Press TOOLS on the remote control and select Play selection. Press TOOLS on the remote control and select Add to Playlist.
My list MENUm → Support → Contents Home → AllShare Play → My list → ENTERE Access desired content more conveniently and quickly. Playlist To play files, select files or a and press E. Recently played: Display video, photo or music files that were recently played. This mode is suitable when playing files again that were played before. •...
Videos MENUm → Support → Contents Home → AllShare Play → Videos → ENTERE Playing a Video Select the internal memory or a USB device. Select files from the list of files. Press the E button or ∂ (Play) button. •...
Photos MENUm → Support → Contents Home → AllShare Play → Photos → ENTERE Viewing a Photo (or Slide Show) Select the internal memory or a USB device. Select a file from the list of files. Press the E button. •...
Music MENUm → → → → → ENTERE Support Contents Home AllShare Play Music Playing Music Select the internal memory or a USB device. Select files from the list of files. Press the E button or ∂(Play) button. • When the music is playing, you can search using the π(REW) and µ(FF) button. ―...
Videos / Photos / Music Play Option menu When playing video or photo files, you can press the TOOLS button to display an Options menu. - Pressing the INFO button while a device name is selected will display Option Name Operations Videos Photos...
Page 152
Option Name Operations Videos Photos Music Sound Mode You can change the Sound Mode. Audio Language You can enjoy video in one of supported languages. The function is enabled only when you play stream-type files which support multiple audio formats. Subtitle You can view a subtitle.
Supported music file formats File Extension Type Codec Comments *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a, *.mpa, *.aac, *.3ga MPEG4 *.flac FLAC FLAC The Seek (jump) function is not supported. Supports up to 2 channel Supported Video Formats • Video content will not play, or not play correctly, if there is an error in the content or the container. •...
Page 155
File Container Video Codec Resolution Frame rate Bit rate Audio Codec Extension (fps) (Mbps) *.avi DIVX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 *.mkv LPCM *.asf ADMPCM MPEG4 SP / ASP *.wmv (IMA, MS) *.mp4 *.mov HE-AAC H.264 BP / MP / HP *.3gp...
Chapter 10 MagicInfo Lite File Formats Compatible with MagicInfo Lite player MagicInfo Lite, select - To launch MagicInfo Lite for the Play Mode the System. Read before using MagicInfo Lite player • Supported file systems include FAT32 and NTFS. • A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played. Check the vertical and horizontal resolution of the file.
Page 157
Contents File Extension Container Video Codec Resolution Frame rate Bit rate Audio Codec (fps) (Mbps) *.avi DIVX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 *.mkv LPCM *.asf MPEG4 SP / ASP *.wmv HE-AAC *.mp4 *.mov H.264 BP / MP / HP *.3gp MPEG(MP3) *.vro...
Page 158
Video Audio Image • 3D video is not supported. • Audio content with a Bit rate or Frame rate • Compatible image file format : Jpeg larger than the rate specified in the table above • Content with a resolution larger than the •...
Page 159
Flash Power Point • Compatible with Flash 10.1 • Compatible document file formats • Flash Animation - Extension : ppt, pptx - Compatible file format : SWF - Version : Office 97 ~ Office 2007 • Functions not supported • Recommended resolution : 960 x 540 - Caution - Animation effect Performance comparable to Flash Player on a Windows operating system...
Page 160
WORD • Compatible document file formats • Compatible document file formats - Extension : pdf - Extension : .doc, .docx - Version : Office 97 ~ Office 2007 • Functions not supported - Content less than 1 pixel not supported because of performance •...
Approving a connected device from the Select Lite from the menus on the left. server Unapproved from the sub-menus of Lite. Select ― First configure the server network settings before device approval. (page 175) Access the server you have assigned to your device. Select the Approve button for your device from the list of unapproved Lite devices.
Enter the information required to approve the device. When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device. The schedule will run after it is downloaded. ― For further details on how to configure a schedule, refer to the <MagicInfo Lite Server user's manual>. ―...
MagicInfo Lite Select Network schedule in the MagicInfo Lite player menu. MagicInfo Lite player MENUm → Support → Contents Home → MagicInfo Lite → ENTERE ― To launch Network schedule MagicInfo Lite, select MagicInfo Lite for the Play Mode on the System. Local schedule ―...
Local schedule → Click to create a schedule → Select the schedule you want to run → Go to Local Schedule Manager Create Local schedule MagicInfo Lite player Select in the menu screen. MagicInfo Lite player Run schedules created in Local Schedule Manager.
Page 165
― To enable and use the option, ensure at least one content file is saved in the "MagicInfoSlide" folder on the USB device. The USB Device Auto Play content file must be a file other than a music or text file. ―...
Local Schedule Manager Create Local Schedule Manager Select in the screen. Configure the settings for playback from Local schedule. Local Schedule Manager Alternatively, select and play content from internal or USB memory according to the customized playback Create sequence. Storage Internal Memory Edit No Playing Schedule...
Page 167
Content Select Duration. Select to specify the content you want to play. Content Direction Internal Memory Content Duration Localschedule Folder1 Menu1.jpg 00:00:05 Menu1.jpg Menu2.jpg 00:00:05 Menu2.jpg Cancel Down Save Deselect Duration Cancel Return Return Specify the sequence and time duration to play content files. - A maximum of 99 content files can be selected.
Select Save. Select the memory space you want to save the content to. Modifying a Local schedule ― Ensure at least one Local schedule is registered. Create Select Local Schedule Manager in the MagicInfo Lite menu screen. Time --:-- ~ --:-- Delete Content Menu1.jpg Menu2...
Deleting a Local schedule Change the details of the local schedule. Next, select Save. ― Ensure at least one Local schedule is registered. Edit ― If a copied local schedule is deleted, content files in the schedule will also be deleted. Time 00:00 ~ 00:00 Delete...
Running a Local schedule Stopping a Local schedule ― Ensure at least one ― This option is available only when a schedule is running. Local schedule is registered. Selecting Stop will change the running mode from Local schedule Network schedule. Select Local Schedule Manager in the...
Page 171
Viewing the details of a Local schedule The details of the schedule will be displayed. Select Local Schedule Manager in the MagicInfo Lite menu screen. Information 2012.01.01_1834.lsch MagicInfo Lite 00:00 ~ 00:00, 2 File(s) - Menu1.jpg Menu2.jpg MagicInfo Lite player Local Schedule Manager Close Content manager...
Page 172
Copying a Local schedule Select local schedule files and press Copy. Select Local Schedule Manager in the MagicInfo Lite menu screen. Local Schedule Manager Storage Internal Memory Create MagicInfo Lite Edit No Playing Schedule MagicInfo Lite player Delete All schedules Local Schedule Manager 2012.01.01_1834.lsch Content manager...
Content manager Select the content you want to copy. Content manager Copying content Internal Memory Select Content manager in the MagicInfo Lite menu screen. Localschedule Folder1 Menu1.jpg Menu2.jpg MagicInfo Lite player MagicInfo Lite player Copy Local Schedule Manager Delete Free Space Free Space 5549.2MB 6227.2MB...
Deleting content Select the content you want to delete. Next, select Delete. Internal Memory • Content under memory can be deleted at the same time. Select Content manager in the MagicInfo Lite menu screen. Content manager MagicInfo Lite player Internal Memory MagicInfo Lite player Localschedule Folder1...
Settings Server Network Settings MagicInfo Lite, connect to a network. To run Settings Server Server Network Settings Enter the MagicInfo Lite server settings. Default content duration (E.g.: http://192.168.0.10:7001/MagicInfo/) Content Ratio Close • If the option is enabled, the server is configured to use https and data transfer is encrypted. Image Effect Random ―...
Default content duration Content Layout Landscape Portrait Specify the duration to play content. Switch the orientation of playing content to mode. Image Viewer Time, Doc viewing time, PPT Viewer Time, PDF Viewing time, Flash Viewing Landscape Portrait • • time ―...
When Content is Running Press the INFO button on the remote control. Software Version: Displays the software version of a device • Device Name: Displays the name of a device recognized by the server • Viewing the details of the content that is running Device ID: Displays the original identification number of a device •...
Page 178
Changing the settings for the content that is running Press the TOOLS button on the remote control. You can change the Picture Mode Sound Mode setting or safely remove a USB device (Safely Remove USB Device) while Tools content is playing by pressing the TOOLS button on the remote control. Picture Mode (Dynamic Standard Natural...
MagicInfo Premium S A Licence needs to be purchased to use MagicInfo Premium MagicInfo Premium S, select - To launch To download the software, go to the Samsung homepage at http://www.samsunglfd.com. MagicInfo Premium S for the Play Mode on the System.
Page 180
Video Audio Image • 3D video is not supported. • Audio content with a Bit rate or Frame rate • Compatible image file format : Jpeg larger than the rate specified in the table above • Content with a resolution larger than the •...
Page 181
Flash Power Point • Compatible with Flash 10.1 • Compatible document file formats • Compatible document file formats - Extension : ppt, pptx - Extension : pdf • Flash Animation - Compatible file format : SWF - Version : Office 97 ~ Office 2007 •...
Page 182
WORD Template files • Compatible document file formats • Creation/editing/playback are only available in • Supported in USB Device Auto Play Template Manager. Network schedule (Authored in a PC - Extension : .doc, .docx authoring tool for Premium S Player) - Version : Office 97 ~ Office 2007 •...
Network Schedule Multiframe Playback restrictions • A maximum of two video files (Videos) can be played simultaneously. • In portrait playback mode, only one video file can be played at a time. • If mode is enabled, more than one video (Videos) file cannot be played. •...
Page 184
Playback restrictions • A maximum of two video (Videos) files can be played. • If mode is enabled, more than one video (Videos) file cannot be played. • More than one Flash file cannot be played. • For Office files (PPT and Word files) and files, only one file type is supported at a time.
Approving a connected device from the Select Premium from the menus on the left. server Unapproved from the sub-menus of Premium. Select ― First configure the server network settings before device approval. (page 202) Access the server you have assigned to your device. Select the Approve button for your device from the list of unapproved Premium devices.
Page 186
Enter the information required to approve the device. When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device. The schedule will run after it is downloaded. ― For further details on how to configure a schedule, refer to the <MagicInfo Premium Server user's manual>.
MagicInfo Premium S Select Network schedule in the MagicInfo Premium S Player menu. MagicInfo Premium S Player MENU m : T Support Contents Home MagicInfo Premium S ENTER E ― To launch Network schedule MagicInfo Premium S, select MagicInfo Premium S for the Play Mode on the System.
Page 188
Local schedule → Click to create a schedule → Select the schedule you want to run → Go to Local Schedule Manager Create Local schedule MagicInfo Premium S Player Select in the menu screen. MagicInfo Premium S Player Run schedules created in Local Schedule Manager.
Page 189
― To enable and use the option, ensure at least one content file is saved in Internal Auto Play Internal Memory. The content file must be a file other than a music or text file. MagicInfo Premium S Player Select Internal Auto Play in the MagicInfo Premium S Player...
Local Schedule Manager Select Create in the Local Schedule Manager screen. Local schedule. Configure the settings for playback from Local Schedule Manager Alternatively, select and play content from internal or USB memory according to the customized playback Create sequence. Storage Internal Memory Edit No Playing Schedule...
Page 191
Select Content to specify the content you want to play. Select Duration. Content Direction Internal Memory Content Duration Localschedule Folder1 Menu1.jpg 00:00:05 Menu1.jpg Menu2.jpg 00:00:05 Template Menu2.jpg Down Cancel Save Deselect Duration Cancel Return Return Specify the sequence and time duration to play content files. - A maximum of 99 content files can be selected.
Page 192
Select Save. Select the memory space you want to save the content to. Modifying a Local schedule ― Ensure at least one Local schedule is registered. Create Select Local Schedule Manager in the MagicInfo Premium S menu screen. Time --:-- ~ --:-- Delete Content Menu1.jpg Menu2...
Page 193
Change the details of the local schedule. Next, select Save. Deleting a Local schedule ― Ensure at least one Local schedule is registered. Edit ― If a copied local schedule is deleted, content files (except for template files) in the schedule will also Time 00:00 ~ 00:00 be deleted.
Page 194
Running a Local schedule Stopping a Local schedule ― Ensure at least one ― This option is available only when a schedule is running. Local schedule is registered. Selecting Stop will change the running mode from Local schedule Network schedule. Select Local Schedule Manager in the...
Page 195
Viewing the details of a Local schedule The details of the schedule will be displayed. Local Schedule Manager MagicInfo Premium S Select in the menu screen. Information 2012.01.01_1834.lsch MagicInfo Premium S 00:00 ~ 00:00, 2 File(s) - Menu1.jpg Menu2.jpg MagicInfo Premium S Player Local Schedule Manager Close Template Player...
Page 196
Copying a Local schedule → USB: Content files (except for templates) in a copied schedule are saved to a Internal Memory • subfolder under the local schedules folder on the memory device. The subfolder is assigned the schedule name. If a content file in a copied schedule contains a template file, the content file is saved Local Schedule Manager MagicInfo Premium S Select...
Template Manager Select Create in the Template Manager screen. Template Manager Registering a Template Create Storage Internal Memory Select Template Manager in the MagicInfo Premium S menu screen. Edit No Playing Schedule Copy MagicInfo Premium S Delete Play MagicInfo Premium S Player Preview Local Schedule Manager Close...
Page 198
Message Organize a template by inserting text, video, photo, or PDF files as desired. Message Create Message None Select the position and the background. Scroll None Use background image Alignment Centre Preview Colour White Previous Cancel Next Return Cancel • Message: Select a message input mode. - None: Select this mode if you do not want to input a message.
Page 199
Content Select sound or background music. Content Create Type None Select sound or background music. Content No Items Background Music Size Fit to screen Preview Source Previous Cancel Next Return Cancel • Type: Select a file type to use to organize a template. None Videos Image...
Content manager Specify Storage and change the Template Name. Select OK. Create Copying content Save the template and finish. Select Content manager in the MagicInfo Premium S menu screen. Storage Internal Template Name 20130101_2222 Preview MagicInfo Premium S Previous MagicInfo Premium S Player Local Schedule Manager Template Manager Cancel...
Page 201
Deleting content Select the content you want to copy. Select Content manager in the MagicInfo Premium S menu screen. Content manager Internal Memory MagicInfo Premium S Deployed Folders Deployed Folders Menu1.jpg MagicInfo Premium S Player Menu2.jpg Local Schedule Manager Template Manager Copy Content manager Close...
Settings Server Network Settings MagicInfo Premium S, connect to a network. To run Settings Server Server Network Settings Enter the MagicInfo Premium S server settings. Default content duration • If the option is enabled, the server is configured to use https and data transfer is encrypted. Content Ratio ―...
Page 203
Content Layout Default content duration Landscape Portrait Switch the orientation of playing content to mode. Specify the duration to play content. Image Viewer Time, Template Display Duration, Doc viewing time, Landscape Portrait • • Viewer Time, PDF Viewing time, Flash Viewing time ―...
When Content is Running Press the INFO button on the remote control. Software Version: Displays the software version of a device • Device Name: Displays the name of a device recognized by the server • Viewing the details of the content that is running Device ID: Displays the original identification number of a device •...
Page 205
Changing the settings for the content that is running Press the TOOLS button on the remote control. You can change the Picture Mode Sound Mode setting or safely remove a USB device (Safely Remove USB Device) while Tools content is playing by pressing the TOOLS button on the remote control. Picture Mode (Dynamic Standard Natural...
MagicInfo Videowall S A licence needs to be purchased to use MagicInfo Videowall MagicInfo Videowall - To launch To download the software, go to the Samsung homepage at http://www.samsunglfd.com. select MagicInfo Videowall S for the Play Mode on the System.
Page 207
Video Image • 3D video is not supported. • Compatible image file format : Jpeg, bmp, png • Content with a resolution larger than the resolution specified in the table • Supported maximum resolution : 15,360 x 8,640 above is not supported. - A higher resolution image may take longer to display on the screen.
Page 208
Restrictions • Only one video (Videos) file can be played per client. ― Different content files can be played on the displays of a video wall. Two video (Videos) files cannot be played on a single display of a video wall. Available Available Not available...
MagicInfo Videowall S Default Storage Specify the location you want to save content (downloaded from the server) to. Internal Memory: Save the content to the internal memory of the product. • MENUm → Support → Contents Home → MagicInfo Videowall S →...
When Content is Running Press the INFO button on the remote control. Software Version: Displays the software version of a device • Information Device Name: Displays the name of a device recognized by the server • Device ID: Displays the original identification number of a device •...
Chapter 13 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre Before calling Samsung Customer Service Testing the Product Centre, test your product as follows. If the problem persists, contact Samsung Check if your product is operating normally by using the product test function.
Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when The blank spaces found on the screen have nothing to do with the product.
Page 213
Screen issue The screen is not clear. The screen is blurry. Adjust Coarse and Fine. Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product.
Page 214
Lines (red, green or blue) are displayed on the screen. These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor. Contact a Samsung Service Centre to resolve the issue. The display looks unstable and then freezes.
Page 215
Remote control issue The remote control does not work. Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failure. Make sure that the power cord is connected. Check for any special lighting or neon signs switched on in the vicinity. Source device issue A beeping sound is heard when my PC is booting.
Page 216
Other issue Small particles are found on the edges of the product. The particles are part of the product design. The product is not defective. menu is not available. Source The menu is enabled or disabled depending on the mode. ―...
Page 217
Other issue The IR sensor is not functioning. Make sure the sensor light turns on when a button is pressed on the remote control. • If the sensor light does not turn on, turn the power switch off and then on again on the back of the product.
Q & A Refer to the user manual for your PC or graphics card for further instructions on adjustment. Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to Control Panel Appearance and Themes Display Settings...
Page 219
Question Answer How do I set powersaving mode? • Windows XP: Set power-saving mode in Control Panel Appearance and Themes Display Screen Saver Settings or BIOS SETUP on the PC. • Windows ME/2000: Set power-saving mode in Control Panel Display Screen Saver Settings or BIOS SETUP on the PC.
Chapter 14 Specifications General Size Model Name UD55D Panel Size 55 Class (54.6 Inches / 138 cm) Display area (H x V) 1209.6 x 680.4 mm / 47.6 x 26.8 Inches Display area Dimensions (W x H x D) 1213.5 x 684.3 x 96.6 mm / 47.8 x 26.9 x 3.8 Inches...
Page 221
― Plug-and-Play Model Name UD55D This monitor can be installed Display Colour and used with any Plug-and-Play 8bit, 16.7M compatible systems. Two-way data exchange between the monitor Synchronization Horizontal 30 ~ 81 kHz and PC system optimizes the Frequency monitor settings.
Page 222
[Recommendation] - EU Only • Hereby, Samsung Electronics, declares that this Monitor is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. • The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
Rating Typical Max. Support the DPM Mode) Power Indicator Blinking Power Consumption UD55D 190 Watts 175 Watts 209 Watts 0.5 Watts 0.5 Watts 0 Watts ― The displayed power consumption level can vary in different operating conditions or when settings are changed.
Preset Timing Modes ― This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product. Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product.
Page 225
Resolution Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity (kHz) (Hz) (MHz) (H/V) VESA, 1024 x 768 56.476 70.069 75.000 VESA, 1024 x 768 60.023 75.029 78.750 VESA, 1152 x 864 67.500 75.000 108.000 VESA, 1280 x 720 45.000 60.000 74.250 VESA, 1280 x 800 49.702...
Chapter 15 Appendix Contact SAMSUNG WORLD WIDE ― If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com/us http://www.samsung.com/ca (English) CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca_fr (French) LATIN AMERICA...
Page 227
LATIN AMERICA http://www.samsung.com/latin (Spanish) COSTA RICA 0-800-507-7267 http://www.samsung.com/latin_en (English) http://www.samsung.com/latin (Spanish) DOMINICA 1-800-751-2676 http://www.samsung.com/latin_en (English) http://www.samsung.com/latin (Spanish) ECUADOR 1-800-10-7267 http://www.samsung.com/latin_en (English) http://www.samsung.com/latin (Spanish) EL SALVADOR 800-6225 http://www.samsung.com/latin_en (English) http://www.samsung.com/latin (Spanish) GUATEMALA 1-800-299-0013 http://www.samsung.com/latin_en (English) http://www.samsung.com/latin (Spanish) HONDURAS 800-27919267 http://www.samsung.com/latin_en (English)
Page 228
062 SAMSUNG (062 726 786) http://www.samsung.com/hr CYPRUS 8009 4000 only from landline http://www.samsung.com/gr 800 - SAMSUNG (800-726786) http://www.samsung.com CZECH Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4 DENMARK 70 70 19 70 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com/ee...
Page 229
0180 6 SAMSUNG bzw. http://www.samsung.com GERMANY 0180 6 7267864* (*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf ) 80111-SAMSUNG (80111 726 7864) only from land line GREECE http://www.samsung.com/gr (+30) 210 6897691 from mobile and land line HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com/hu...
― When the service is requested, in spite of in warranty, we may charge you for a visit from a service • Use of supplies or separatly sold product unspecified by Samsung. technician in the following cases. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd. Not a product defect •...
WEEE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality • To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. - Resolution: 1920 x 1080 - Vertical frequency (refresh rate): 48 ~ 75 Hz •...
What is afterimage burn-in? Prevention of Afterimage Burn-in Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a Black Matrix Color-Filter Common...
Page 239
- Brightness: refers to the lightness or • Avoid combinations of a text colour and background colour of contrasting brightness. darkness of a colour which varies ― Avoid using grey as it may contribute to afterimage burn-in. depending on the amount of light ―...
License DivX Certified Ⓡ to play DivX Ⓡ video up to HD 1080p, including premium content. DivXⓇ, DivX CertifiedⓇ and associated logos are trademarks of DivX, Inc. and are used under license. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol aretrademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivXⓇ...
Terminology DVD (Digital Versatile Disc)____ DVD 480i / 480p / 720p / 1080i / Non-interlace Mode and Interlace Vertical Frequency____ The product Component ports (green, blue and red)____ The component ports, which 1080p____ Each of the scanning Mode____ Non-interlace mode displays a single image many times refers to a CD-sized mass storage disk rates above refers to the number of...