Time; Clock Set; Dst; Sleep Timer - Samsung UD46E-A User Manual

Time

MENU m → System → Time → ENTER E
You can configure

Clock Set

or Sleep Timer. You can also set the product to automatically turn on or
off at a specified time using the Timer function.
― Press the INFO button if you want to view the current time.
Clock Set
Clock Set. Select Date or Time, and then press E.
Select
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and
right arrow buttons to move from one entry field to the next. Press E when done.
― You can set the
Date Time
and directly by pressing the number buttons on the remote control.

DST

Switches the DST (Daylight Saving Time) function on or off.
Off / On
Start Date: Set the start date of Daylight Saving Time.
•
End Date: Set the end date of Daylight Saving Time.
•
Time Offset: Select the correct time offset your timezone.
•

Sleep Timer

Automatically shuts off the product after a preset period of time.
(Off / 30 min. / 60 min. / 90 min. / 120 min.
― Use the up and down arrows to select a period of time, and then press E. To cancel
select Off.

Power On Delay

When connecting multiple products, adjust the power-on time for each product to prevent power
overload (within the range 0–50 seconds).
/ 150 min. / 180 min.)

MagicInfo I Source

MENU m → System
― The
MagicInfo I Source
Pressing MagicInfo Player I on the remote control displays content connected to the network box (sold
separately).
DVI / DisplayPort
•

Auto Source Switching

MENU m → System
Turning on the display with
active, the display will automatically search the different video input sources for active video.
Auto Source Switching
When the Auto Source Switching
active video.
The Primary Source
Secondary Source
If both the primary and secondary input sources are not recognized, the display will perform two
searches for an active source, each search checking the primary and then secondary source. If both
Sleep Timer,
searches fail, the display will return to the first video source and display a message indicating that there
is no signal.
When the Primary Source
in sequence looking for an active video source, returning back to the first video source in the sequence
if no video is found.
→ MagicInfo I Source → ENTER E
feature is available if a network box (sold separately) is connected.
→ Auto Source Switching → ENTER E
Auto Source Switching On, and the previous video source selection is not
is On, the display video source will automatically be searched for
selection will be activated, if the current video source is not recognized.
selection will become active, if no primary video source is available.
selection is set to All, the display will search all the video source inputs twice
67